Get a quote

Long Radius Bend

Products Long Radius Bend
Buttweld Long Radius Bend
Welded Long Radius Bend
Forms Seamless Long Radius Bend
Buttweld Welded Long Radius Bend
Long Radius Bend Mitered

BS1560 Long Radius Bend, Carbon Steel Long Radius Bend Stockist, ASTM A403 SS Long Radius Bend, ANSI B16.9 Butt weld Long Radius Bend, Duplex Steel Long Radius Bend, MSS SP-95 Long Radius Bend Manufacturer in India.

Athlete Piping Solution is a famous distributor and supplier of Long Radius Bend Pipe Fittings, which could be very hard-carrying and may easily in shape to any length. Duplex Steel Long Radius Bend Pipe Fittings has a few true resistance to standard corrosion, crevice corrosion and pitting in chemical compounds that carries phosphoric, chlorides, sulfuric, and nitric acids. It as well carries niobium for stabilization in competition to sensitization and consequential intergranular corrosion. They are provided in via suitable check certificate of standard raw materials and finished products. In water down sulphuric acid tainted via chloride ions, they have got more suitable corrosion resistance. They are hard-bitten on a variety of parameters consisting of stress resistance, sturdiness and strength, temperature.


Nickel Alloy Long Radius Bend, Hastelloy Long Radius Bend, Carbon Steel Long Radius Bend, Inconel Long Radius Bend, SS Long Radius Bend, Monel Long Radius Bend, Stainless Steel Long Radius Bend, Alloy Steel Buttweld Long Radius Bend Supplier in Mumbai, India.

Its major interstitial alloying detail is carbon, accordingly the name, at a variety of applications. As percent of carbon content material increases, Inconel Alloy Long Radius Bend Pipe Fittings has the functionality to show into pretty more potent and more difficult within the route of heat-treating. It is a structural nice steel plate, and consequently used for a massive variety of well-known creation and business applications. It gives greater strength and hardness levels. High carbon steel bars are extraordinarily strong. It manufactures a forged steel ring to taut forbearances, which allows for minimum material recognition and fantastically little waste. Its chloride and pitting ion corrosion and its copper substance guards it from sulphuric acid.

Monel Alloy Long Radius Bend Pipe Fittings provide higher integrity for difficult engineering applications. They are being reduce from steel plates are considerably provided to our customers in fabrication and engineering space. It is being made from with sure percentage of nickel with ASTM standards. The addition of inhibited portions of manganese and iron on this steel in an uncommon resistance to well-known corrosion and strain cracking, further to impingement and erosion, due to volatile water that carries silt flowing and air bubbles at increased velocities. However, the diminutive iron substance, gives our product a staggering resistance to wide-ranging corrosion and strain corrosion cracking, and accordingly making it fantastically perfect and appropriate for the economic or marine industries.

Specification of Long Radius Bend

Long Radius Bend Pipe Fittings size Seamless Butt Weld Fittings: 1/2" - 10"
Welded Butt Weld Fittings: 1/2" - 48"
Long Radius Bend Fitting Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Long Radius Bend Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Long Radius Bend Types Seamless / ERW / Welded / Fabricated Pipe Fittings
Grooved Long Radius Bend Type DN15-DN1200
Connection Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Long Radius Bend Fitting Fittings Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process Push, Press, Forge, Cast, etc.
Long Radius Bend Fittings Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Origin & Mills Japanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Long Radius Bend
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Application
  • Fittings To Connect Long Radius Bend & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • ASME B16.9 Schedule 10 Long Radius Bend are an economical alternative for lower-pressure applications.
  • ANSI B16.9 Schedule 40 Long Radius Bend have a thicker wall for higher-pressure applications.

Material Grades of Long Radius Bend

Stainless Steel Long Radius Bend ASTM A403 WP316, 316L, WP304, 304L, ASTM A182 F316L, 304L, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Alloy Steel Long Radius Bend ASTM A234, ASME SA234 WP1, WP5, WP9, WP11, WP22, WP91
Super Duplex Long Radius Bend ASTM A815 / ASME SA815 UNS No S32750, S32950
Duplex Steel Long Radius Bend ASTM A815 / ASME SA815 UNS No S31803, S32205
Nickel Alloy Long Radius Bend ASTM B336, ASME SB336, Nickel 200 (UNS N02200), Nickel 201 (UNS N02201), Monel 400 (UNS N04400), Monel 500 (UNS N05500), Inconel 800 (UNS N08800), Inconel 825 (UNS N08825), Inconel 600 (UNS N06600), Inconel 625 (UNS N06625), Inconel 601 (UNS N06601), Hastelloy C 276 (UNS N10276), Titanium (Grade I & II), Alloy 20 (UNS N08020), Cupro Nickel 70/30, CuNi30Mn1Fe, CuNi10Fe1Mn.
Carbon Steel Long Radius Bend ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel Long Radius Bend ASTM A420 WPL3, A420 WPL6

Looking to Buy SS Long Radius Bend from Suppliers, Ask For ready stock of ASTM A403 Long Radius Bend in Mumbai, India.

Long Radius Bend Dimensions

Nominal 
Pipe Size		 Outside 
Diameter		 Inside 
Diameter		 Wall 
Thickness		 Center 
To End		 Pipe 
Schedule		 Weight
Pounds
1/2 0.84 0.622 0.109 1.5 40 0.16
3/4 1.05 0.824 0.113 1.5 40 0.17
1 1.32 1.049 0.133 1.5 40 0.4
1 1/4 1.66 1.38 0.14 1.88 40 0.55
1 1/2 1.9 1.61 0.145 2.25 40 0.8
2 2.38 2.07 0.154 3 40 1.6
2 1/2 2.88 2.47 0.203 3.75 40 3.2
3 3.5 3.07 0.216 4.5 40 4.8
3 1/2 4 3.55 0.226 5.25 40 6.6
4 4.5 4.03 0.237 6 40 8.9
5 5.56 5.05 0.258 7.5 40 15.1
6 6.62 6.07 0.28 9 40 24
8 8.62 7.98 0.322 12 40 47.8
10 10.75 10.02 0.365 15 40 83.4
12 12.75 12 0.375 18 * 123
14 14 13.25 0.375 21 30 155
16 16 15.25 0.375 24 30 206
18 18 17.25 0.375 27 * 262
20 20 19.25 0.375 30 20 324
24 24 23.25 0.375 36 20 466
30 30 29.25 0.375 45 * 720
36 36 35.25 0.375 54 * 1,039
42 42 41.25 0.375 63 * 1,420
48 48 47.25 0.375 72 * 2,000

Long Radius Bend Extra Strong Sizes

Nominal 
Pipe Size		 Outside 
Diameter		 Inside 
Diameter		 Wall 
Thickness		 Center 
To End		 Pipe 
Schedule		 Weight
Pounds
1/2 0.84 0.546 0.147 1.5 80 0.26
3/4 1.05 0.742 0.154 1.5 80 0.29
1 1.32 0.957 0.179 1.5 80 0.48
1 1/4 1.66 1.27 0.191 1.88 80 0.79
1 1/2 1.9 1.5 0.2 2.25 80 1.2
2 2.37 1.93 0.218 3 80 2.1
2 1/2 2.88 2.32 0.276 3.75 80 3.8
3 3.5 2.9 0.3 4.5 80 6.3
3 1/2 4 3.36 0.318 5.25 80 8.6
4 4.5 3.82 0.337 6 80 12.5
5 5.56 4.81 0.375 7.5 80 21.2
6 6.63 5.76 0.432 9 80 34.4
8 8.63 7.63 0.5 12 80 71.3
10 10.75 9.75 0.5 15 60 111
12 12.75 11.75 0.5 18 * 158
14 14 13 0.5 21 * 201
16 16 15 0.5 24 40 270
18 18 17 0.5 27 * 348
20 20 19 0.5 30 30 422
24 24 23 0.5 36 * 604
30 30 29 0.5 45 20 997
36 36 35 0.5 54 20 1,380
42 42 41 0.5 63 * 1,880
48 48 47 0.5 72 * 2,502

Ready Stock of Long Radius Bend

  • 45 Degree Long Radius Bend SCH 10
  • Carbon Steel Long Radius Bend
  • MSS SP95 Long Radius Bend
  • BS1560 Long Radius Bend Mitered
  • 254 SMO Long Radius Bend
  • ASME B16.9 Inconel Long Radius Bend
  • High Nickel Alloy Long Radius Bend
  • ANSI B16.9 Long Radius Bend LR A234 WPB, 12 Inch
  • Monel Long Radius Bend
  • Stainless Steel Long Radius Bend
  • ANSI B16.9 Buttweld Long Radius Bend
  • DIN 2605 Long Radius Bend
  • ASME B16.9 Buttweld Long Radius Bend
  • Super Duplex 2507 Long Radius Bend
  • Alloy Steel Long Radius Bend
  • Nickel Alloy Long Radius Bend
  • SS Long Radius Bend
  • ASME B16.9 Hastelloy Long Radius Bend
  • DIN 1.0619 Long Radius Bend LR
  • Brass SR Long Radius Bend
  • SCH 60, ASTM A234 WPB Long Radius Bend LR
  • Carbon Steel Long Radius Bend Pipe Fitting Sch 80
  • Smls Long Radius Bend Sch 80
  • ASTM A403, SCH 40, 1 Inch, Long Radius Bend
  • 12 Inch, Long Radius Bend, SCH40, BW
  • Nickel Alloy Butt weld Long Radius Bend
  • Titanium Buttweld Long Radius Bend
  • Duplex Steel 2205 Long Radius Bend
  • Stainless Steel Long Radius Bend Barrel Fitting
  • Buttweld Long Radius Bend

Long Radius Bend Export Destinations

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Get An Easy Quotation

Manufacturer Of SS Long Radius Bend.
Call Us Any Time:
+91 8080256582 or
Get in Touch