Athlete Piping Solution is an identified manufacturer and seller of Cu-Ni 70 / 30 Instrumentation Tube Fittings, which has higher grain established order as measured as much as solid or solid items, lessening of the routine maintenance costs, and so on. We are offering these excessive features of this Cupronickel 70 / 30 Instrumentation Tube Fittings by way of the maximum enhance era and within the corporation of maximum reliable best. Hardness checking out for this steel will be achieved at mid-thickness of the product. Tension take a look at, hardness take a look at, pulling down take a look at, and flaring take a look at for this steel will be finished to every tube. In addition, this steel will be subjected to the non-unfavourable hydrostatic take a look at or electric powered take a look at.
Copper Nickel UNS C71500 Instrumentation Tube Fittings are significantly utilized in a variety of application enterprise which include Oil & Gas, Power, Fertilizers, Heat-Exchangers, Paper & Pulp, pharmaceuticals, Chemicals, Water Treatment, Dairy, and so on. They are termed as a worried anxiety maintaining plate via one stable vacate and one open vacate joined thru a tie-bar or a web. In speculation process, the open shapes of this product close down among the alloy and permit the same old waft everywhere in the pipe work.
Copper Nickel WNR. 2.0882 Instrumentation Tube Fittings, which is likewise termed because the metering apparatus, consist an incredibly skinny plate via a rectangular edge, spherical commencing and concentric within the centre. Two strain tap-holes also are being pierced on this product for to gauge the variant of strain at some point of the commencing. There are pretty lots of benefits of this product, inclusive of it is very a lot unfastened from any limitations, and has an unadulterated carrier life. This product is generally referred to as a solid or solid ring that is deliberate to sign up for and layout an array of pipe sections or especially to another equipment that requires a connecting factor within the vital factor.
Specifications | ASTM B122, A276, A479 / ASME SB122, SA276, SA479 |
---|---|
Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
Working Pressures | Upto 2000 to 6000 PSI |
Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
Tube Fitting uses & application |
|
Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
STANDARD | UNS | WNR. |
Cu-Ni 70/30 | C71500 | 2.0882 |
Looking to Buy Copper Nickel 70/30 Tube Fittings from Suppliers, Ask For ready stock of UNS C71500 Pipe Elbow in Mumbai, India.
Grade | Cu | Mn | Pb | Ni | Fe | Zn |
Cu-Ni 70/30 | 65 min | 1.0 max | 0.05 max | 29-33 max | 0.4-1.0 max | 1 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
NPT/ISO Pipe Size in. | Tube Fittings | |
---|---|---|
Male | Female | |
psig (bar) | psig (bar) | |
1/16 | 11 000 (757) | 6 700 (461) |
1/8 | 10 000 (689) | 6 500 (447) |
1/4 | 8 000 (551) | 6 600 (454) |
3/8 | 7 800 (537) | 5 300 (365) |
1/2 | 7 700 (530) | 4 900 (337) |
3/4 | 7 300 (502) | 4 600 (316) |
1 | 5 300 (365) | 4 400 (303) |
1 1/4 | 6 000 (413) | 5 000 (344) |
1 1/2 | 5 000 (344) | 4 600 (316) |
2 | 3 900 (268) | 3 900 (268) |
OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
(fraction inch) | (inches) | (inches) | NPT | BSP |
5/16 | 0.3125 | 1/16 | 27 | 28 |
13/32 | 0.405 | 1/8 | 27 | 28 |
35/64 | 0.540 | 1/4 | 18 | 19 |
43/64 | 0.675 | 3/8 | 18 | 19 |
27/32 | 0.840 | 1/2 | 14 | 14 |
1-3/64 | 1.050 | 3/4 | 14 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
2-3/8 | 2.375 | 2 | 8 | 11 |
2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
3-1/2 | 3.5 | 3 | 8 | 11 |
4 | 4.0 | 3-1/2 | 8 | 11 |
4-1/2 | 4.5 | 4 | 8 | 11 |
5-5/8 | 5.563 | 5 | 8 | 11 |
6-5/8 | 6.625 | 6 | 8 | 11 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |