Athlete Piping Solution is a famous exporter and distributor of Female Run Tee Tube Fittings, which responds well to hardening through cold working. Meanwhile, heat remedy in these Stainless Steel Female Run Tee Tube Fittings conforms to that for set up austenitic stainless metallic. And solution heat remedy of this alloy should be done decrease a few extent, at 930 Deg Celsius to 1030 Deg Celsius by way of rapid cooling. Nickel and Cobalt base corrosion, put on-resistant and temperature alloys, including these products, are being categorised as tough to mild whilst machining. Meanwhile, at some point of machining these products turn out to be corporation quickly, make excessive heat at some point of slicing, weld to the slicing tool surface and offer an expanded resistance to steel removal for the purpose that in their hovering shear strengths.
However, the chromium content material in these Super Duplex Steel Female Run Tee Tube Fittings gives a superior resistance beneath oxidizing forms, on the identical time the hovering nickel gives amazing resistance to lowering forms. They are actually proof against chlorine ion pressure corrosion cracking. It demonstrates enough resistance to natural acids including formic, stearic and acetic. It additionally has correct resistance to hovering purity water utilized in secondary and number one circuits of pressurized nuclear reactors. It is carried out within the shape of thread sealing compound or thread seal tape, and it's far after that threaded into an equal threaded becoming through the usage of pipe wrenches.
Brass Female Run Tee Tube Fittings has a few amazing welding properties and post-weld annealing isn't always required in fashionable for to reinstate its correct overall performance in an intensive variety of corrosive forms. It is a titanium stabilised austenitic stainless. The addition of titanium to this metallic facilitates to enhance its welding traits and the excessive temperature properties of the metallic. It offers correct corrosion resistance and oxidation resistance. Meanwhile, it offers better creep and pressure rupture properties that of austenitic stainless metallic. However, they should be highlighted that these alloys may be machined through the usage of common manufacturing methods at suitable rates.
Imperial Size | 1/2″ to 2″ |
Dimensional Standard | ASME / ANSI B 16.9 |
Tube Size | 1/16”OD to 2”OD, 2mm OD to 50mm ODe |
Thread | NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc. |
Pressure Rating | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
Temperature Ratings | Up to 1000°F (537°C) |
Looking to Buy SS Tube To Female Run Tee from Suppliers, Ask For ready stock of Female Run Tee Instrumentation Fittings in Mumbai, India.
Imperial tubing | |||||||||||||
Tube O.D | NPT thread | A | C | H | L | W | Min. bore | ||||||
inch | mm | mm | inch | mm | inch | mm | inch | inch | |||||
1/8 | 1/8 | 1.75 | 44.45 | 1.00 | 25.40 | 0.75 | 19.05 | 0.75 | 19.05 | 9/16 | 0.09 | ||
3/16 | 1/8 | 1.75 | 44.45 | 1.00 | 25.40 | 0.75 | 19.05 | 0.75 | 19.05 | 9/16 | 0.13 | ||
1/4 | 1/8 | 1.83 | 46.48 | 1.08 | 27.43 | 0.75 | 19.05 | 0.78 | 19.81 | 9/16 | 0.19 | ||
1/4 | 1/4 | 2.05 | 52.07 | 1.21 | 30.73 | 0.84 | 21.34 | 0.91 | 23.11 | 3/4 | 0.19 | ||
5/16 | 1/8 | 1.85 | 46.99 | 1.10 | 27.94 | 0.75 | 19.05 | 0.81 | 20.57 | 9/16 | 0.25 | ||
3/8 | 1/4 | 2.10 | 53.34 | 1.26 | 32.00 | 0.84 | 21.34 | 0.97 | 24.64 | 3/4 | 0.28 | ||
1/2 | 3/8 | 2.32 | 58.93 | 1.41 | 35.81 | 0.91 | 23.11 | 1.03 | 26.16 | 7/8 | 0.41 | ||
1/2 | 1/2 | 2.64 | 67.06 | 1.51 | 38.35 | 1.31 | 33.27 | 1.13 | 28.70 | 1.1/16 | 0.41 | ||
3/4 | 3/4 | 2.88 | 73.15 | 1.63 | 41.40 | 1.25 | 31.75 | 1.25 | 31.75 | 1.5/16 | 0.63 | ||
7/8 | 1/2 | 2.64 | 67.1 | 1.51 | 38.4 | 1.13 | 28.7 | 1.13 | 28.7 | 1.1/16 | 0.63 | ||
7/8 | 3/4 | 2.88 | 73.2 | 1.63 | 41.4 | 1.25 | 31.75 | 1.25 | 31.75 | 1.5/16 | 0.75 | ||
1 | 3/4 | 3.03 | 76.96 | 1.78 | 45.21 | 1.25 | 31.75 | 1.31 | 33.27 | 1.5/16 | 0.88 | ||
1 | 1 | 3.50 | 88.90 | 2.00 | 50.80 | 1.50 | 38.10 | 1.53 | 38.86 | 1.5/8 | 0.88 | ||
Metric tubing | |||||||||||||
Tube O.D mm | NPT thread | A | C | H | L | W | Min. bore | ||||||
inch | mm | inch | mm | inch | mm | inch | mm | inch | inch | ||||
3 | 1/8 | 1.75 | 44.45 | 1.00 | 25.40 | 0.75 | 19.05 | 0.75 | 19.05 | 9/16 | 0.09 | ||
6 | 1/8 | 1.83 | 46.48 | 1.08 | 27.43 | 0.75 | 19.05 | 0.78 | 19.81 | 9/16 | 0.19 | ||
6 | 1/4 | 2.05 | 52.07 | 1.21 | 30.73 | 0.84 | 21.34 | 0.91 | 23.11 | 3/4 | 0.19 | ||
8 | 1/8 | 1.85 | 46.99 | 1.10 | 27.94 | 0.75 | 19.05 | 0.81 | 20.57 | 9/16 | 0.25 | ||
10 | 1/4 | 2.10 | 53.34 | 1.26 | 32.00 | 0.84 | 21.34 | 0.97 | 24.64 | 3/4 | 0.28 | ||
12 | 3/8 | 2.32 | 58.93 | 1.41 | 35.81 | 0.91 | 23.11 | 1.03 | 26.16 | 7/8 | 0.41 | ||
12 | 1/2 | 2.64 | 67.06 | 1.51 | 38.35 | 1.31 | 33.27 | 1.13 | 28.70 | 1.1/16 | 0.41 | ||
20 | 3/4 | 2.88 | 73.15 | 1.63 | 41.40 | 1.25 | 31.75 | 1.25 | 31.75 | 1.5/16 | 0.63 | ||
25 | 3/4 | 3.03 | 76.96 | 1.78 | 45.21 | 1.25 | 31.75 | 1.31 | 33.27 | 1.5/16 | 0.88 | ||
25 | 1 | 3.50 | 88.90 | 2.00 | 50.80 | 1.50 | 38.10 | 1.53 | 38.86 | 1.5/8 | 0.88 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |