Get a quote

Nickel Alloy 200 Flanges

Products 200 Nickel Threaded Flanges
Nickel 200 Blind Flanges
Equivalent Grades UNS N02200
2.4066
Grade 200
Forms Weldo
Groove / Tongue
Sorf
Standard Specifications ASTM B564
ASME SB564
ANSI B16.9

Nickel Alloy NW 2200 Flanges, Nickel 200 Slip On Flanges, Nickel Alloy 200 Socket Weld Flanges , 2.4066 Threaded Flanges, UNS N02200 Lap Joint Flanges, Alloy 200 Blind Flanges Stockist Manufacturer in India.

Athlete Piping Solution is a known distributor and supplier of Nickel 200 Flanges, which is applied for ease of fabrication and so are nicely suitable for fabricated or formed applications. Nickel UNS N02200 Slip On Flanges has a few superb corrosion resistance traits. This product is first and primary used for welding low carbon molybdenum-bearing austenitic alloys. It is getting used for specific applications along with for welding specific steels, soaring strength and advanced yield steels. This product is likewise used to weld solid alloys of virtually identical form of composition and is used to weld specific metals and weld overlays. When welding comparable solid alloys for this product, limitation welding to layers simply. It is used for welding steel by way of parallel composition. Meanwhile, these product are cost-powerful and available at marketplace best prices.


200 Nickel Ring Type Joint Flanges, 200 Nickel Alloy Sorf Flanges, Nickel Alloy UNS N02200 Orifice Flanges, Nickel Alloy NW 2200 Spectacle Blind Flanges, Nickel Alloy 200 Threaded Flanges, ASTM B564 Nickel 200 Flanges, ANSI B16.9 200 Nickel Long Weld Neck Flanges Supplier in Mumbai, India.

Typical commercial sectors of these Nickel WNR 2.4066 Blind Flanges is Brewing, Chemical Industry, Dairy, Food processing, Marine system, Petrochemicals, Pharmaceuticals, and greater. Typical product applications of these steel is Condensers, Heat Exchangers, Filters, Pressure Vessels, Valves, and greater. This steel has an excessive resistance to many chemical corrodes and marine atmospheres. They are greater proof against popular corrosion and pitting / crevices than traditional austenitic alloys. This steel additionally provide better creep, pressure-to-rupture and tensile strength at accelerated temperatures. It is frequently used at cryogenic temperatures, with first-rate sturdiness to -450 Degree F, and coffee magnetic permeability.

Ni-200 Spectacle Blind Flanges is a low carbon model and is much less at risk of embrittlement and sensitization in carrier. They are having a few extraordinary traits such because it has Oxidation resistance to 2000 Degree F and Moderate strength at excessive temperature. This steel gives Resistance to hot corrosion, Strength and sturdiness at cryogenic temperatures, etc. They are utilized in Sintering / Cement Plants – burners, burner shields, feeding and discharging systems, wind boxes. This product also are utilized in thermal Processing – annealing covers and boxes, burner grids, doors, fans, muffles and retorts, recuperators, on foot beams. It may be without problems welded and processed by standard store fabrication practices.

Specification of Nickel Alloy 200 Flanges

Specifications ASTM B564 / ASME SB564
Flanges size 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Flanges Dimensions ANSI/ASME B16.9, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange.
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Manufacturing Standards ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc
B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)
Any other specilised Flange
DIN: DIN 2527, DIN 2566, DIN 2573, UNS S45367 Flange, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Flanges uses & application Nuclear power (mostly seamless).
Petrochemicals and acids.
Bitumen upgraders.
Heavy oil refineries.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175.

Equivalent Grades Nickel Alloy 200 Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Various Types of 200 Nickel Alloy Flanges

Nickel Alloy 200 Blind Flanges
Nickel Alloy 200 Blind Flanges
Nickel Alloy 200 Ring Type Joint Flange
Nickel Alloy 200 Ring Type Joint Flange
Nickel Alloy 200 Weld Neck Flanges
Nickel Alloy 200 Weld Neck Flanges
Nickel Alloy 200 Socket Weld Flanges
Nickel Alloy 200 Socket weld Flanges
Nickel Alloy 200 Lapped Joint Flanges
Nickel Alloy 200 Lapped Joint Flanges
Nickel Alloy 200 Slip On Flanges
Nickel Alloy 200 Slip On Flanges

200 Nickel Alloy Flanges International Standards

American Standard Standard Code ANSI ASME SB-564 ANSI ASME B16.9 ASME – B 16.47 ASME – B 16.36    
Standard Name Forged Flanges Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange Welding neck flange, Blind flange Welding neck flange Slip on flange    
German Standard DIN 2527 DIN 2573 / 2576 DIN 2673 DIN 2641 / 2642 DIN 28115 DIN PN10, PN16 DIN PN20, PN25
Steel Blind Flanges, BLRF Flat Flange for Welding (Slip On) Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) Lapped / Loose (Lap Joint) Flanges Plain Collars Long Neck Welding Flanges PN10 Flanges, DIN PN 10 Flanges, PN16 Flange PN20 Flanges, DIN PN 25 Flanges
Japanese Standard JIS B2220 JIS B2291 JIS 5K, 10K JIS 16K, 20K JIS 30K, 40K    
Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) 5K SORF Flanges, 10K SOFF Flanges 16K Blind Flanges, 20K BLRF Flanges 30K Slip on Flanges, 40K Blind Flanges    
Italian Standard UNI FLANGES            
Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)            
British Standard BS 10 Table D BS 10 Table E BS 10 Table F BS 10 Table H      
BS 10 Table D Flanges, Table D Pipe Flange BS 10 Table E Flanges, Table E Pipe Flange BS 10 Table E Flanges, Table E Flanges BS 10 Table E Flanges, Table E Pipe Flanges      

Looking to Buy Nickel 200 Flanges from Suppliers, Ask For ready stock of UNS N02200 Blind Flanges in Mumbai, India.

Nickel Alloy 200 Flanges Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel Alloy 200 Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Size Chart Of Nickel Alloy 200 Flange

Nominal Pipe Size Outside Diameter of Flanges Thickness of Flanges Diameter of Raised Face Diameter of Hub at Base Length Thru Hub Diameter or Bore Diameter of Hub at Bevel Radius of Fillet Depth of Socket
Welding Neck Slip-On Threaded Socket Lap Joint Slip-on Socket Lap Joint
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Weight Chart Of Nickel Alloy 200 Flanges

Pipe Normal Diam. O.D. Flange  Thk. Of Flange Min  Diam.
of
Hub 		 Diameter of Raised Face  Length Hub.Y Thread Length Diam. 
of Bolt
Circle		 Diam. 
of Bolt
Holes		 Number
of Bolts		 Diam. of
Bolts
(inch)		 KG LB
inch dn O C X G Y T BC BH BN BD
1/2" 15 89.00 11.20 30.20 35.10 15.70 15.70 60.50 15.80 4 1/2" 0.4 0.9
3/4" 20 98.50 12.70 38.10 42.90 15.70 15.70 69.90 15.80 4 1/2" 0.7 1.5
1" 25 108.00 14.20 49.30 50.80 17.50 17.50 79.30 15.80 4 1/2" 0.8 1.8
1-1/4" 32 117.50 15.70 58.70 63.50 20.60 20.60 88.90 15.80 4 1/2" 1.2 2.6
1-1/2" 40 127.00 17.50 65.00 73.20 22.40 22.40 98.60 15.80 4 1/2" 1.5 3.3
2" 50 152.50 19.10 77.70 91.90 25.40 25.40 120.70 19.10 4 5/8" 2.3 5.1
2-1/2" 65 178.00 22.40 90.40 104.60 28.40 28.40 139.70 19.10 4 5/8" 3.7 8.1
3" 80 190.50 23.90 108.00 127.00 30.20 30.20 152.40 19.10 4 5/8" 4.1 9
3-1/2" 90 216.00 23.90 122.20 139.70 31.80 31.80 177.80 19.10 8 5/8" 5.1 11.2
4" 100 228.50 23.90 134.90 157.20 33.30 33.30 190.50 19.10 8 5/8" 5.9 13
5" 125 254.00 23.90 163.60 185.70 36.60 36.60 215.90 22.40 8 3/4" 7 15.4
6" 150 279.50 25.40 192.00 215.90 39.60 39.60 241.30 22.40 8 3/4" 8.4 18.5
8" 200 343.00 28.40 246.10 269.70 44.50 44.50 298.50 22.40 8 3/4" 13 28.6
10" 250 406.50 30.20 304.80 323.90 49.30 49.30 362.00 25.40 12 7/8" 18 39.5
12" 300 482.50 31.80 365.30 381.00 55.60 55.60 431.80 25.40 12 7/8" 29 64
14" 350 533.50 35.10 400.10 412.80 57.20 57.20 476.30 28.50 12 1" 39 86
16" 400 597.00 36.60 457.20 469.90 63.50 63.50 539.80 28.50 16 1" 47 103
18" 450 635.00 39.60 505.00 533.40 68.30 68.30 577.90 31.80 16 1 1/8" 57 126
20" 500 698.50 42.90 558.80 584.20 73.20 73.20 635.00 31.80 20 1 1/8" 76 167
24" 600 813.00 47.80 663.40 692.20 82.60 82.60 749.30 35.10 20 1 1/4" 97 214

Ready Stock of Nickel Alloy 200 Flanges

  • Nickel 200 Class 2500 Flange
  • 200 Nickel Short Pipe Flanges Stockist
  • Nickel Alloy 200 Raised Face Flanges
  • Inconel UNS N02200 Welding Neck Flanges Supplier in Mumbai
  • 200 Nickel Alloy Long Weld Neck Flanges
  • Nickel WERKSTOFF NR. 2.4066 Hydraulic SAE Flanges
  • ASTM B564 200 Nickel Weld Neck Flanges
  • Nickel 200 Lapped Joint Flanges
  • Nickel Alloy NW 2200 SWRF Flanges
  • Nickel WERKSTOFF NR. 2.4066 Threaded Flanges
  • ANSI B16.9 Nickel 200 Nippolet Flange
  • N02200 Nickel PN16 Flanges Exporter
  • Nickel Alloy 200 Male & Female Flanges
  • EN Ni 99.2 Plate Flanges
  • Nickel UNS N02200 Tongue & Groove Flange
  • Nickel Alloy 200 EN 1092-1 Flange
  • Nickel Alloy UNS N02200 Flanges
  • Nickel 200 Weld Neck Flanges
  • 200 Nickel Alloy WNRF Flanges
  • ASME SB564 Alloy 200 Puddle Flanges
  • Nickel Alloy 200 BLRTJ Flanges
  • Nickel WNR. 2.4066 Forged Flanges
  • Nickel Alloy 200 Ring Type Joint Flange
  • EN Ni 99.2 Pipe Flanges
  • Nickel UNS N02200 Loose Flanges Manufacturer
  • Nickel Alloy UNS N02200 SWRF Flanges
  • 200 Nickle Alloy Screwed Flanges
  • Nickel UNS N06200 Orifice Flanges Stockist
  • Nickel Alloy NW 2200 Loose Flanges
  • ANSI B16.9 Nickel 200 Reducing Flanges
  • Nickel Alloy 200 RTJ Flanges
  • ASTM B564 200 Nickel Plate Flanges
  • Nickel 200 Industrial Flange
  • 200 Nickel Alloy BLRF Flanges
  • N02200 Nickel Expander Flanges
  • Nickel 200 Spectacle Blind Flanges
  • Nickel WERKSTOFF NR. 2.4066 Flanges
  • ASTM B564 Nickel 200 BLRF Flanges
  • Nickel 200 Raised Face Flanges
  • 200 Nickel Alloy Threaded Flanges
  • ASME B16.9 200 Nickel Flanges Stockholder
  • Nickel Alloy NW 220 90° Short Radius Elbow
  • ASME SB564 Ni 200 Orifice Flanges

Nickel Alloy 200 Flanges Export Destinations

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Get An Easy Quotation

Manufacturer Of Nickel Alloy 200 Flanges.
Call Us Any Time:
+91 8080256582 or
Get in Touch