Athlete Piping Solution is a recognized distributor and manufacturer of Stainless Steel 304 / 304L Instrumentation Tube Fittings, which are appropriate for carrier in rather corrosive situations and in which excessive strength is required. The excessive chromium and molybdenum content material of this Stainless Steel UNS S30400 Instrumentation Tube Fittings makes it extraordinarily immune to uniform corrosion through natural acids like formic and acetic acid. They are rather useful to their excessive temperature strength and resistance to scaling at expanded temperatures. Stainless Steel WNR 1.4301 Instrumentation Tube Fittings may be machined, shot - peened and polished in as - constructed or pressure relieved states if required, in which the rust is the apparent seen proof of corrosive activity. Solution annealing of this steel isn't always vital for the purpose that the mechanical properties of as - constructed nation are displaying favoured values.
An exception to that is that these Alloy 304 Instrumentation Tube Fittings has about 24 % chromium, and may be used to face up to scaling at temperatures as much as 1100 Degree C. It has very excessive weld ability, smooth for set up and excessive antifouling properties in opposition to sea microorganisms. The excessive content material of chromium in these Stainless Steel UNS S30403 Instrumentation Tube Fittings are so useful to the moist corrosion resistance. They are typically utilized in condensers, coolers and heat exchangers in which resistance to corrosion and erosion are vital.
Stainless Steel WNR 1.4306 Instrumentation Tube Fittings are an appealing alternative while thinking about the existence cycle cost of a set up. It does now no longer cater to rust and performs a critical position in resisting all varieties of business obstacles. Alloy 304L Instrumentation Tube Fittings provide a few exceptional capabilities inclusive of Durable, High Tensile Strength, Weather Resistant, Anti – Corrosive, and so on. It specially takes place because of environmental elements inclusive of wind exposure, commercial pollutants and expanded temperatures, and is worse towards the sea, a primary reason of salt water pollutants.
Specifications | ASTM A182, A276, A479 / ASME SA182, SA276, SA479 |
---|---|
Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
Working Pressures | Upto 2000 to 6000 PSI |
Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
Tube Fitting uses & application |
|
Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
SS 304L | 1.4306 / 1.4307 | S30403 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
Looking to Buy SS 304 Tube Fittings from Suppliers, Ask For ready stock of UNS S30400 Pipe Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
SS 304L | 0.35 max | 2 max | 1.00 max | 0.045 max | 0.03 max | 18 – 20 | – | 8 – 13 | – |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
304 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
304L | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
NPT/ISO Pipe Size in. | Tube Fittings | |
---|---|---|
Male | Female | |
psig (bar) | psig (bar) | |
1/16 | 11 000 (757) | 6 700 (461) |
1/8 | 10 000 (689) | 6 500 (447) |
1/4 | 8 000 (551) | 6 600 (454) |
3/8 | 7 800 (537) | 5 300 (365) |
1/2 | 7 700 (530) | 4 900 (337) |
3/4 | 7 300 (502) | 4 600 (316) |
1 | 5 300 (365) | 4 400 (303) |
1 1/4 | 6 000 (413) | 5 000 (344) |
1 1/2 | 5 000 (344) | 4 600 (316) |
2 | 3 900 (268) | 3 900 (268) |
OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
(fraction inch) | (inches) | (inches) | NPT | BSP |
5/16 | 0.3125 | 1/16 | 27 | 28 |
13/32 | 0.405 | 1/8 | 27 | 28 |
35/64 | 0.540 | 1/4 | 18 | 19 |
43/64 | 0.675 | 3/8 | 18 | 19 |
27/32 | 0.840 | 1/2 | 14 | 14 |
1-3/64 | 1.050 | 3/4 | 14 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
2-3/8 | 2.375 | 2 | 8 | 11 |
2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
3-1/2 | 3.5 | 3 | 8 | 11 |
4 | 4.0 | 3-1/2 | 8 | 11 |
4-1/2 | 4.5 | 4 | 8 | 11 |
5-5/8 | 5.563 | 5 | 8 | 11 |
6-5/8 | 6.625 | 6 | 8 | 11 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |