Athlete Piping Solution is a recognized seller and supplier of Duplex Steel S31803 / S32205 Instrumentation Tube Fittings, which is substantially utilized in Dairy Industry, Chemical Industries, Pharmaceutical Industries, and so on. To start the layout of these Duplex 2205 Instrumentation Tube Fittings, the primary pass is to work out the heat feature of the heat exchanger. It needs to be mentioned that for less complicated layout of this steel, it's far higher to pay no interest to heat failure to the surroundings for initial layout. However, Chemical Reactors or Reaction Vessel form of this steel may be supplied with various kinds of Agitator. Also, this steel is being made from with the aid of using the use of qualitative metals and different nice raw material as consistent with countrywide and global excellent standards. In many commercial progressions for this steel, there's a heat circulation or waste of strength this is worn out.
Alloy 2205 Instrumentation Tube Fittings may be used to tug thru this heat and positioned it to apply with the aid of using heating a various circulation within the procedure. This steel saves an exquisite deal of amount in industry, because the heat furnished to different streams from the heat exchangers could otherwise come from an outer supply this is greater high priced and greater adverse to the surroundings. This product might also additionally possibly be divided with the aid of using a difficult wall to forestall blending or they'll possibly be in direct contact.
Duplex Steel WNR 1.4462 Instrumentation Tube Fittings are substantially utilized in refrigeration, space heating, air conditioning, chemical plants, strength stations, petrochemical plants, natural-gas processing, sewage treatment, and petroleum refineries. In counter-glide this product, the fluids come into the exchanger from opposite ends. The counter cutting-edge layout is the maximum proficient, in that this product can pass the maximum heat from the heat-switch intermediate consistent with unit mass attributable to the truth that the everyday temperature divergence alongside any unit period is advanced.
Specifications | ASTM A182, A276, A479 / ASME SA182, SA276, SA479 |
---|---|
Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
Working Pressures | Upto 2000 to 6000 PSI |
Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
Tube Fitting uses & application |
|
Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
STANDARD | WERKSTOFF NR. | UNS |
Duplex 2205 | 1.4462 | S31803 / S32205 |
Looking to Buy DSS S31803 Tube Fittings from Suppliers, Ask For ready stock of UNS S32205 Pipe Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Tensile Strength, ksi | 0.2% Yield Strength, ksi | Elongation, % | Hardness [HRC] |
---|---|---|---|
90 min | 65 min | 25 min | 293 max |
NPT/ISO Pipe Size in. | Tube Fittings | |
---|---|---|
Male | Female | |
psig (bar) | psig (bar) | |
1/16 | 11 000 (757) | 6 700 (461) |
1/8 | 10 000 (689) | 6 500 (447) |
1/4 | 8 000 (551) | 6 600 (454) |
3/8 | 7 800 (537) | 5 300 (365) |
1/2 | 7 700 (530) | 4 900 (337) |
3/4 | 7 300 (502) | 4 600 (316) |
1 | 5 300 (365) | 4 400 (303) |
1 1/4 | 6 000 (413) | 5 000 (344) |
1 1/2 | 5 000 (344) | 4 600 (316) |
2 | 3 900 (268) | 3 900 (268) |
OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
(fraction inch) | (inches) | (inches) | NPT | BSP |
5/16 | 0.3125 | 1/16 | 27 | 28 |
13/32 | 0.405 | 1/8 | 27 | 28 |
35/64 | 0.540 | 1/4 | 18 | 19 |
43/64 | 0.675 | 3/8 | 18 | 19 |
27/32 | 0.840 | 1/2 | 14 | 14 |
1-3/64 | 1.050 | 3/4 | 14 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
2-3/8 | 2.375 | 2 | 8 | 11 |
2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
3-1/2 | 3.5 | 3 | 8 | 11 |
4 | 4.0 | 3-1/2 | 8 | 11 |
4-1/2 | 4.5 | 4 | 8 | 11 |
5-5/8 | 5.563 | 5 | 8 | 11 |
6-5/8 | 6.625 | 6 | 8 | 11 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |