Athlete Piping Solution is a recognized seller and trader of Super Duplex Steel S32750 / S32760 Instrumentation Tube Fittings, which are widely utilized in numerous industries for pipe connection. In parallel-glide of these Super Duplex 2507 Instrumentation Tube Fittings, the fluids come into the exchanger on the identical end, and trek in similar to each other to the opposite side. In a cross-glide these products, the fluids thru greater or much less at proper angles to each other are all through the exchanger. For effectiveness, this product are supposed to make the maximum of surface region of the wall flanked with the aid of using the fluids, even though decreasing war of words to fluid glide all through the exchanger. It is part of system constructed for competent heat switch from one medium to a one-of-a-kind medium.
Alloy 2507 Instrumentation Tube Fittings are the one of the best exchangers this is being utilized in industries. This steel is made from an incredibly excessive standard excellent raw material, and is preferred for its long-lasting life. It is a part of equipment that is being constructed for a successful heat switch from one medium to different. The standard instance of this steel is in truth observed in an internal incineration engine wherein a circulating fluid diagnosed as engine coolant flow the entire manner thru air flows and radiator coils beyond the coils, which heats the incoming air and cools the coolant.
Super Duplex Steel WNR 1.4410 Instrumentation Tube Fittings minimizes the strain drop (pumping strength), minimizes the entropy generation (thermodynamic), and additionally maximizes the thermal overall performance. Meanwhile, the pouring hotness for this steel throughout the heat switch surface varies thru position; however an appropriate mean-temperature may be definite. This steel is used to instruct heat exchanger layout fundamentals to newcomers because the number one policies for all heat exchangers are one and the identical. And so, the principle feature of this product is to extrude the glide and route within the direction of a glide angle.
Specifications | ASTM A182, A276, A479 / ASME SA182, SA276, SA479 |
---|---|
Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
Working Pressures | Upto 2000 to 6000 PSI |
Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
Tube Fitting uses & application |
|
Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
STANDARD | WERKSTOFF NR. | UNS |
Super Duplex 2507 | 1.4410 | S32750 |
Super Duplex 2507 | 1.4501 | S32760 |
Looking to Buy SDSS S32750 Tube Fittings from Suppliers, Ask For ready stock of UNS S32760 Pipe Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
S32760 | 0.05 max | 1.00 max | 1.00 max | 0.030 max | 0.010 max | 24.00 – 26.00 | 3.00 – 4.00 | 6.00 – 8.00 | 0.20 – 0.30 | 57.61 min |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
2507 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000, MPa – 800 | Psi – 80000, MPa – 550 | 15 % |
NPT/ISO Pipe Size in. | Tube Fittings | |
---|---|---|
Male | Female | |
psig (bar) | psig (bar) | |
1/16 | 11 000 (757) | 6 700 (461) |
1/8 | 10 000 (689) | 6 500 (447) |
1/4 | 8 000 (551) | 6 600 (454) |
3/8 | 7 800 (537) | 5 300 (365) |
1/2 | 7 700 (530) | 4 900 (337) |
3/4 | 7 300 (502) | 4 600 (316) |
1 | 5 300 (365) | 4 400 (303) |
1 1/4 | 6 000 (413) | 5 000 (344) |
1 1/2 | 5 000 (344) | 4 600 (316) |
2 | 3 900 (268) | 3 900 (268) |
OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
(fraction inch) | (inches) | (inches) | NPT | BSP |
5/16 | 0.3125 | 1/16 | 27 | 28 |
13/32 | 0.405 | 1/8 | 27 | 28 |
35/64 | 0.540 | 1/4 | 18 | 19 |
43/64 | 0.675 | 3/8 | 18 | 19 |
27/32 | 0.840 | 1/2 | 14 | 14 |
1-3/64 | 1.050 | 3/4 | 14 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
2-3/8 | 2.375 | 2 | 8 | 11 |
2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
3-1/2 | 3.5 | 3 | 8 | 11 |
4 | 4.0 | 3-1/2 | 8 | 11 |
4-1/2 | 4.5 | 4 | 8 | 11 |
5-5/8 | 5.563 | 5 | 8 | 11 |
6-5/8 | 6.625 | 6 | 8 | 11 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |