Athlete Piping Solution is a recognized seller and distributor of Inconel Alloy 600 Instrumentation Tube Fittings, which is taken into consideration as a becoming a popular alloy, and is made from in one-of-a-kind classes. Inconel UNS N06600 Instrumentation Tube Fittings are used as a connection factor among lengths of pipes for to make alter within the glide and route within the pipe. They have a midpoint-to-midpoint period, collectively with double the interchangeable angle. This product and its associated alloy within the piping gadget allocate the immediately loss of participation of the exacting component concerned. It is one of the maximum often used for commercial becoming that allows to sign up for tubes or pipes of various diameters. This product are at period used to shield the ends of pipe, collectively with retaining out the dust and different foreign material.
However, the principle motive of the use of these Inconel WNR 2.4816 Instrumentation Tube Fittings is to have a waterproof connection. On the opposite hand, the application of this product is to permit the flowing to the midpoint of the glide. Well, the main run of this product is exceeded thru this ‘glide’, while the outlet is being diagnosed because the ‘department’. This steel is used for lateral connections and is clean to get to fulfil specific strengthening necessities. This product has been made up in this sort of way with appreciate to lessen the pressure awareness and pipe stresses features.
Nickel Alloy 600 Instrumentation Tube Fittings gives a one-piece and self-help connection, wherein round layout of it permits using mechanical burning tools. And therefore, they are clean to get to in plunging or full-scale department alliances for the each class. Meanwhile, this product is extensively used for connection in pipes and tubes in numerous industries, in which it gives a one-piece and self-strengthened connection. Nonetheless, this product can as nicely be used for a drainage connection whilst an opening isn't always accessible. However, if used for lateral correlations, then this product are pretty on hand to fulfil specific reinforcement necessities.
Specifications | ASTM B366, A276, A479 / ASME SB366, SA276, SA479 |
---|---|
Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
Working Pressures | Upto 2000 to 6000 PSI |
Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
Tube Fitting uses & application |
|
Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
Inconel 600 | N06600 | 2.4816 | NC15FE11M | NiCr15Fe | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | ЭИ868 |
Looking to Buy Inconel 600 Tube Fittings from Suppliers, Ask For ready stock of UNS N06600 Pipe Elbow in Mumbai, India.
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015 max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.47 g/cm3 | 1413 °C (2580 °F) | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
NPT/ISO Pipe Size in. | Tube Fittings | |
---|---|---|
Male | Female | |
psig (bar) | psig (bar) | |
1/16 | 11 000 (757) | 6 700 (461) |
1/8 | 10 000 (689) | 6 500 (447) |
1/4 | 8 000 (551) | 6 600 (454) |
3/8 | 7 800 (537) | 5 300 (365) |
1/2 | 7 700 (530) | 4 900 (337) |
3/4 | 7 300 (502) | 4 600 (316) |
1 | 5 300 (365) | 4 400 (303) |
1 1/4 | 6 000 (413) | 5 000 (344) |
1 1/2 | 5 000 (344) | 4 600 (316) |
2 | 3 900 (268) | 3 900 (268) |
OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
(fraction inch) | (inches) | (inches) | NPT | BSP |
5/16 | 0.3125 | 1/16 | 27 | 28 |
13/32 | 0.405 | 1/8 | 27 | 28 |
35/64 | 0.540 | 1/4 | 18 | 19 |
43/64 | 0.675 | 3/8 | 18 | 19 |
27/32 | 0.840 | 1/2 | 14 | 14 |
1-3/64 | 1.050 | 3/4 | 14 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
2-3/8 | 2.375 | 2 | 8 | 11 |
2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
3-1/2 | 3.5 | 3 | 8 | 11 |
4 | 4.0 | 3-1/2 | 8 | 11 |
4-1/2 | 4.5 | 4 | 8 | 11 |
5-5/8 | 5.563 | 5 | 8 | 11 |
6-5/8 | 6.625 | 6 | 8 | 11 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |