Athlete Piping Solution is a branded distributor and supplier of Inconel Alloy 600 Threaded Fittings, which has excessive strength and corrosion resistance. Inconel UNS N06600 Threaded Cross Fittings is the low carbon model of the alloy, and is operated for easiness of fabrication. However, because of its excessive chromium content material, it's far extra corrosion resistant than maximum heat resistant alloys. Alloy has a carbon content material confined to exclude the decrease cease of this steel, so is the grade of desire for excessive temperature applications. The excessive chromium content material of this alloy intends to boom excessive temperature properties and offers appropriate aqueous corrosion resistance. Like different austenitic grades, they've top notch toughness, even right all the way down to cryogenic temperatures, even though different grades are generally utilized in sub-zero environments.
Inconel WNR 2.4816 Threaded Cap Fittings is non-magnetic within the annealed circumstance however can also additionally end up barely magnetic due to welding. It is harder and is for this reason pretty advocated to apply chip breakers. Hardenability of this steel could be decreased if regular feeds and occasional speeds are used. It is a titanium stabilised model of molybdenum-bearing austenitic steel. It provides better creep, stress-rupture and tensile strength at improved temperature. They have equal corrosion resistance to sensitisation because the low carbon model. Meanwhile, they may be used for various applications consisting of in Chemical processes, High temperature, Automotive, Control strains and others.
The addition of molybdenum on this Nickel Alloy 600 Threaded Coupling Fittings gives stepped forward resistance to pitting and crevice corrosion in environments containing chlorides and different halides. They are at risk of intergranular corrosion after long time publicity at excessive temperatures. These products are being utilized in coping with many chemical compounds this is especially utilized by the method industries, along with pulp and paper, textile, food, pharmaceutical, medical, and different chemical processing. It may be blanked, formed and pierced just like carbon steel, and has tremendous ductility that lets in it to stretch, spin and bend extra effortlessly. They are quite proof against corrosion by means of impartial and alkaline salt solutions.
Specifications | ASTM B564 / ASME SB564 |
---|---|
Size | 1/8″ NB to 4″ NB Screwed-Threaded |
Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Class | 2000lb/ 3000lb/ 6000lbs |
From | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, Unions, Equal Tees & Reducing Tees, Plugs. |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
American Steel Threaded Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-182 | Forged fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
Looking to Buy Inconel 600 Threaded Fittings from Suppliers, Ask For ready stock of UNS N06600 Threaded Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Cu | Ni | Fe |
Inconel 600 | 0.15 max | 1 max | 0.5 max | – | 0.015 max | 14 – 17 | 0.50 max | 72 min | 6.0-10.0 |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
DN | NPS | Center to End NPT Elbow, NPT Tee, NPT Cross A |
Center to End 45 Deg Elbow C |
O.D. of Band H |
Min. Wall Thick. G |
Length of Thread. Minimum (1) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
25 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1-1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1-1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 86 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2-1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
85 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
DN | NPS | End to End Couplings W |
End to End Caps P |
O.D. D | End Wall Thick. G Minimum |
Length of Thread. Minimum (1) |
||||
---|---|---|---|---|---|---|---|---|---|---|
Class 3000&Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 32 | 19 | … | 16 | 22 | 4.8 | … | 6.4 | 6.7 |
8 | 1/4 | 35 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
10 | 3/8 | 38 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
15 | 1/2 | 48 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
20 | 3/4 | 51 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
25 | 1 | 60 | 41 | 43 | 44 | 57 | 9.7 | 11.2 | 14.7 | 17.3 |
32 | 1-1/4 | 67 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17.0 | 18.0 |
40 | 1-1/2 | 79 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
50 | 2 | 86 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
65 | 2-1/2 | 92 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
80 | 3 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
100 | 4 | 121 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Pressure-Temperature | |||||
---|---|---|---|---|---|
Temperature | Class | ||||
150 | 300 | ||||
1/4 – 1 inch. | 1 1/4 – 2 inch. | 2 1/2 – 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | – | 935 | 750 | 560 |
450 | 232 | – | 725 | 600 | 475 |
500 | 260 | – | 510 | 450 | 385 |
550 | 288 | – | 300 | 300 | 300 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |