Athlete Piping Solution is a branded distributor and seller of Inconel Alloy 625 Threaded Fittings, which may be each hot formed and cold formed through using standard methods. Meanwhile, the fabrication of these Inconel UNS N06625 Threaded Elbow Fittings is extraordinary of nickel-base alloys, within the employer of material voluntarily weldable and formable through special strategies. It changed into evolved to provide outstanding corrosion resistance in each lowering and oxidizing atmospheres. They are iron-chromium-nickel primarily based totally alloys through manner of getting outstanding resistance and excellent strength to carburization and oxidation in hovering temperature exposure. The nickel content material in these products makes them extraordinarily immune to each embrittlement and carburisation, from precipitation of sigma point.
The resistance of this Inconel WNR 2.4856 Threaded Tee Fittings to corrosion through herbal and distilled waters is admirable. In addition, it as well gives an awesome carrier in flowing sea water even at hovering speed. However, in stagnant or extraordinarily low-speed sea water, a stern neighbourhood assault can also additionally possibly arise on this alloy beneath fouling organisms or different deposits. Like maximum different nickel alloys, it's also difficult to gadget and will work harden. However, great effects may be obtained for this steel in case you make the proper picks for machining and tooling. It has a few outstanding mechanical properties, including having excellent tensile, creep-rupture and fatigue. Meanwhile, these yield tensile strength, creep and rupture strength traits of these products are very tons excessive in nature.
Nickel Alloy 625 Threaded Lateral Tee Fittings also are getting used for several applications including in Aerospace, Pulp and paper industry, Heat treating industry, Nuclear Engineering, Food processing, Gas turbine components, etc. They are available for special applications including in Petrochemical and Chemical processing, Electronics, Processing device for upholding product purity in managing foods, alkalis and artificial fibres. It is solely certified as an ideal candidate for piping structures in ship-constructing industries due to its alloy functions, which encompass resistance to pressure corrosion cracking due to ammonia in seawater, low formed corrosion rates in seawater, pressure corrosion due to chlorides and hovering resistance to crevice corrosion, etc.
Specifications | ASTM B564 / ASME SB564 |
---|---|
Size | 1/8″ NB to 4″ NB Screwed-Threaded |
Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Class | 2000lb/ 3000lb/ 6000lbs |
From | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, Unions, Equal Tees & Reducing Tees, Plugs. |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
American Steel Threaded Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-182 | Forged fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
Looking to Buy Inconel 625 Threaded Fittings from Suppliers, Ask For ready stock of UNS N06625 Threaded Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Cu | Ni | Fe |
inconel 625 | 0.10 max | 0.50 max | 0.50 max | – | 0.015 max | 20.0 – 23.0 | – | 58 min | 5.0 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
DN | NPS | Center to End NPT Elbow, NPT Tee, NPT Cross A |
Center to End 45 Deg Elbow C |
O.D. of Band H |
Min. Wall Thick. G |
Length of Thread. Minimum (1) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
25 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1-1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1-1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 86 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2-1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
85 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
DN | NPS | End to End Couplings W |
End to End Caps P |
O.D. D | End Wall Thick. G Minimum |
Length of Thread. Minimum (1) |
||||
---|---|---|---|---|---|---|---|---|---|---|
Class 3000&Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 32 | 19 | … | 16 | 22 | 4.8 | … | 6.4 | 6.7 |
8 | 1/4 | 35 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
10 | 3/8 | 38 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
15 | 1/2 | 48 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
20 | 3/4 | 51 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
25 | 1 | 60 | 41 | 43 | 44 | 57 | 9.7 | 11.2 | 14.7 | 17.3 |
32 | 1-1/4 | 67 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17.0 | 18.0 |
40 | 1-1/2 | 79 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
50 | 2 | 86 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
65 | 2-1/2 | 92 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
80 | 3 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
100 | 4 | 121 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Pressure-Temperature | |||||
---|---|---|---|---|---|
Temperature | Class | ||||
150 | 300 | ||||
1/4 – 1 inch. | 1 1/4 – 2 inch. | 2 1/2 – 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | – | 935 | 750 | 560 |
450 | 232 | – | 725 | 600 | 475 |
500 | 260 | – | 510 | 450 | 385 |
550 | 288 | – | 300 | 300 | 300 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |