Products
400 Monel Threaded Flanges
Monel 400 Blind Flanges
- Phone +91 8080256582
- Email: sales@indiasteelindustries.com
Equivalent Grades
UNS N04400
2.4360
Grade 400
2.4360
Grade 400
Forms
Weldo
Groove / Tongue
Sorf
Groove / Tongue
Sorf
Standard Specifications
ASTM B564
ASME SB564
ANSI B16.9
ASME SB564
ANSI B16.9
Alloy 400 Blind Flanges, Monel® Alloy 400 Socket Weld Flanges, Monel 400 Flanges, 2.4360 Threaded Flanges, UNS N04400 Lap Joint Flanges, Nickel Alloy 400 Slip On Flanges Stockist Manufacturer in India.
Athlete Piping Solution is a known distributor and seller of Monel Alloy 400 Flanges, which additionally has a barely decrease yield and tensile strength. Monel UNS N04400 Threaded Flanges is used at temperatures as much as 1150 Degree C in non-stop carrier, and 1035 Degree C in intermittent carrier. This product may be hardened with the aid of using cold work; however that is not often practiced. Fabrication of these product is solid within the temperature variety 975 Degree C – 1175 Degree C. Heavy work on this product is executed right all the way down to 1050°C right here and a mild finish is carried out to the lowest of the variety. Corrosion Resistance of this product is usually now no longer used for corrosive liquid carrier, despite the fact that the excessive chromium and nickel content material supply corrosion resistance superior.
400 Monel Ring Type Joint Flanges, Monel UNS N04400 Spectacle Blind Flanges, Nickel Alloy 400 Threaded Flanges, High Quality 400 Monel Orifice Flanges, ASTM B564 Alloy 400 Flanges, ANSI B16.9 400 Monel Long Weld Neck Flanges, Moloy Alloy 400 Sorf Flanges Supplier in Mumbai, India.
Monel WNR 2.4361 Socket Weld Flanges may be sensitised to intergranular corrosion after carrier at temperatures in variety 550 Degree C – 800 Degree C. Chloride strain corrosion cracking might also additionally take vicinity in corrosive beverages for this product containing chlorides at temperatures exceeding 100 Degree C. This product unfold a load, and save you harm to the surface being fixed, or offer a few kind of insulation together with electrical. This steel is most glaringly so while the thread is tapered, precluding the usage of a nut, or while a sheet steel screw or different thread-forming screw is used. These steel are being designed to have interaction within the system of the device used to tighten them.
Nickel Alloy 400 Weld Neck Flanges needs to for all of the time be grown to become to collect the joint. Applications of these steel is Moisture separator reheaters, Feedwater tubes, Stator bars, Heat exchangers, and greater. Industries predominantly the use of this steel is Nuclear and power, General engineering, etc. This steel has a decrease carbon content material which improves weldability and lowers the chance of decreased corrosion resistance across the weld. Typical applications of these products are Dairy and food processing industries, Heat exchangers, evaporators, Feedwater heaters, and others.
Specification of Monel 400 Flanges
| Specifications | ASTM B564 / ASME SB564 |
|---|---|
| Flanges size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Flanges Dimensions | ANSI/ASME B16.9, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Manufacturing Standards | ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised Flange DIN: DIN 2527, DIN 2566, DIN 2573, UNS S45367 Flange, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276 |
| Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Flanges uses & application | Nuclear power (mostly seamless). Petrochemicals and acids. Bitumen upgraders. Heavy oil refineries. |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175. | |
Equivalent Grades Monel 400 Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Various Types of 400 Monel Flanges
Monel 400 Blind Flanges
Monel 400 Ring Type Joint Flange
Monel 400 Weld Neck Flanges
Monel 400 Socket weld Flanges
Monel 400 Lapped Joint Flanges
Monel 400 Slip On Flanges
400 Monel Flanges International Standards
| American Standard | Standard Code | ANSI ASME SB-564 | ANSI ASME B16.5 | ASME – B 16.47 | ASME – B 16.36 | ||
|---|---|---|---|---|---|---|---|
| Standard Name | Forged Flanges | Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange | Welding neck flange, Blind flange | Welding neck flange Slip on flange | |||
| German Standard | DIN 2527 | DIN 2573 / 2576 | DIN 2673 | DIN 2641 / 2642 | DIN 28115 | DIN PN10, PN16 | DIN PN20, PN25 |
| Steel Blind Flanges, BLRF | Flat Flange for Welding (Slip On) | Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) | Lapped / Loose (Lap Joint) Flanges Plain Collars | Long Neck Welding Flanges | PN10 Flanges, DIN PN 10 Flanges, PN16 Flange | PN20 Flanges, DIN PN 25 Flanges | |
| Japanese Standard | JIS B2220 | JIS B2291 | JIS 5K, 10K | JIS 16K, 20K | JIS 30K, 40K | ||
| Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) | Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) | 5K SORF Flanges, 10K SOFF Flanges | 16K Blind Flanges, 20K BLRF Flanges | 30K Slip on Flanges, 40K Blind Flanges | |||
| Italian Standard | UNI FLANGES | ||||||
| Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254) | |||||||
| British Standard | BS 10 Table D | BS 10 Table E | BS 10 Table F | BS 10 Table H | |||
| BS 10 Table D Flanges, Table D Pipe Flange | BS 10 Table E Flanges, Table E Pipe Flange | BS 10 Table E Flanges, Table E Flanges | BS 10 Table E Flanges, Table E Pipe Flanges |
Looking to Buy Monel 400 Flanges from Suppliers, Ask For ready stock of UNS N04400 Blind Flanges in Mumbai, India.
Monel 400 Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Monel 400 Flanges Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Size Chart Of Monel 400 Flange
| Nominal Pipe Size | Outside Diameter of Flanges | Thickness of Flanges | Diameter of Raised Face | Diameter of Hub at Base | Length Thru Hub | Diameter or Bore | Diameter of Hub at Bevel | Radius of Fillet | Depth of Socket | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Welding Neck | Slip-On Threaded Socket | Lap Joint | Slip-on Socket | Lap Joint | ||||||||
| O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
| 1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
| 3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
| 1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
| 1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
| 1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
| 2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
| 2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
| 3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
| 3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
| 4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
| 5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
| 6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
| 8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
| 10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
| 12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
| 14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
| 16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
| 18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
| 20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
| 24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
Weight Chart Of Monel 400 Flanges
| Pipe Normal Diam. | O.D. Flange | Thk. Of Flange Min | Diam. of Hub |
Diameter of Raised Face | Length Hub.Y | Thread Length | Diam. of Bolt Circle |
Diam. of Bolt Holes |
Number of Bolts |
Diam. of Bolts (inch) |
KG | LB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| inch | dn | O | C | X | G | Y | T | BC | BH | BN | BD | ||
| 1/2" | 15 | 89.00 | 11.20 | 30.20 | 35.10 | 15.70 | 15.70 | 60.50 | 15.80 | 4 | 1/2" | 0.4 | 0.9 |
| 3/4" | 20 | 98.50 | 12.70 | 38.10 | 42.90 | 15.70 | 15.70 | 69.90 | 15.80 | 4 | 1/2" | 0.7 | 1.5 |
| 1" | 25 | 108.00 | 14.20 | 49.30 | 50.80 | 17.50 | 17.50 | 79.30 | 15.80 | 4 | 1/2" | 0.8 | 1.8 |
| 1-1/4" | 32 | 117.50 | 15.70 | 58.70 | 63.50 | 20.60 | 20.60 | 88.90 | 15.80 | 4 | 1/2" | 1.2 | 2.6 |
| 1-1/2" | 40 | 127.00 | 17.50 | 65.00 | 73.20 | 22.40 | 22.40 | 98.60 | 15.80 | 4 | 1/2" | 1.5 | 3.3 |
| 2" | 50 | 152.50 | 19.10 | 77.70 | 91.90 | 25.40 | 25.40 | 120.70 | 19.10 | 4 | 5/8" | 2.3 | 5.1 |
| 2-1/2" | 65 | 178.00 | 22.40 | 90.40 | 104.60 | 28.40 | 28.40 | 139.70 | 19.10 | 4 | 5/8" | 3.7 | 8.1 |
| 3" | 80 | 190.50 | 23.90 | 108.00 | 127.00 | 30.20 | 30.20 | 152.40 | 19.10 | 4 | 5/8" | 4.1 | 9 |
| 3-1/2" | 90 | 216.00 | 23.90 | 122.20 | 139.70 | 31.80 | 31.80 | 177.80 | 19.10 | 8 | 5/8" | 5.1 | 11.2 |
| 4" | 100 | 228.50 | 23.90 | 134.90 | 157.20 | 33.30 | 33.30 | 190.50 | 19.10 | 8 | 5/8" | 5.9 | 13 |
| 5" | 125 | 254.00 | 23.90 | 163.60 | 185.70 | 36.60 | 36.60 | 215.90 | 22.40 | 8 | 3/4" | 7 | 15.4 |
| 6" | 150 | 279.50 | 25.40 | 192.00 | 215.90 | 39.60 | 39.60 | 241.30 | 22.40 | 8 | 3/4" | 8.4 | 18.5 |
| 8" | 200 | 343.00 | 28.40 | 246.10 | 269.70 | 44.50 | 44.50 | 298.50 | 22.40 | 8 | 3/4" | 13 | 28.6 |
| 10" | 250 | 406.50 | 30.20 | 304.80 | 323.90 | 49.30 | 49.30 | 362.00 | 25.40 | 12 | 7/8" | 18 | 39.5 |
| 12" | 300 | 482.50 | 31.80 | 365.30 | 381.00 | 55.60 | 55.60 | 431.80 | 25.40 | 12 | 7/8" | 29 | 64 |
| 14" | 350 | 533.50 | 35.10 | 400.10 | 412.80 | 57.20 | 57.20 | 476.30 | 28.50 | 12 | 1" | 39 | 86 |
| 16" | 400 | 597.00 | 36.60 | 457.20 | 469.90 | 63.50 | 63.50 | 539.80 | 28.50 | 16 | 1" | 47 | 103 |
| 18" | 450 | 635.00 | 39.60 | 505.00 | 533.40 | 68.30 | 68.30 | 577.90 | 31.80 | 16 | 1 1/8" | 57 | 126 |
| 20" | 500 | 698.50 | 42.90 | 558.80 | 584.20 | 73.20 | 73.20 | 635.00 | 31.80 | 20 | 1 1/8" | 76 | 167 |
| 24" | 600 | 813.00 | 47.80 | 663.40 | 692.20 | 82.60 | 82.60 | 749.30 | 35.10 | 20 | 1 1/4" | 97 | 214 |
Ready Stock of Monel 400 Flanges
- Monel NW 4400 Class 2500 Flange
- Alloy 400 Short Pipe Flanges Stockist
- Monel Alloy 400 Raised Face Flanges
- Monel UNS N04400 Welding Neck Flanges Supplier in Mumbai
- 400 Monel Long Weld Neck Flanges
- Monel WERKSTOFF NR. 2.4360 Hydraulic SAE Flanges
- ASTM B564 400 Monel Weld Neck Flanges
- 400 Alloy Lapped Joint Flanges
- High Quality 400 Monel SWRF Flanges
- Monel WERKSTOFF NR. 2.4360 Threaded Flanges
- ANSI B16.9 Alloy 400 Nippolet Flange
- Monel 400 PN16 Flanges Exporter
- Monel® Alloy 400 Male & Female Flanges
- EN NiCu30Fe Plate Flanges
- Monel UNS N04400 Tongue & Groove Flange
- Monel Alloy 400 EN 1092-1 Flange
- Monel NCF 400 Flanges
- Alloy 400 Weld Neck Flanges
- 400 Monel WNRF Flanges
- Monel® Alloy 400 Puddle Flanges
- Nickel Alloy 400 BLRTJ Flanges
- Monel WNR. 2.4360 Forged Flanges
- Monel® Alloy 400 Ring Type Joint Flange
- Monel UNS N04400 Loose Flanges Manufacturer
- Alloy N04400 Pipe Flanges
- Nickle Alloy 400 Screwed Flanges
- Monel UNS N04400 Orifice Flanges Stockist
- High Quality 400 Monel SWRF Flanges
- Monel NCF 400 Loose Flanges
- ANSI B16.9 Alloy 400 Reducing Flanges
- Monel Alloy 400 RTJ Flanges
- ASTM B564 400 Monel Plate Flanges
- Monel 400 Industrial Flange
- Nickel Alloy 400 BLRF Flanges
- Monel® Alloy 400 Expander Flanges
- 400 Monel Spectacle Blind Flanges
- Monel WERKSTOFF NR. 2.4360 Flanges
- ASTM B564 Monel 400 BLRF Flanges
- Monel 400 Raised Face Flanges
- Monel NW 4400 Threaded Flanges
- ASME B16.9 400 Monel Flanges Stockholder
- High Quality 400 Monel 90° Short Radius Elbow
- Monel Alloy 400 Orifice Flanges
Monel 400 Flanges Export Destinations
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |
Get An Easy Quotation
Manufacturer Of Monel 400 Flanges.