Athlete Piping Solution is a known supplier and exporter of Monel Alloy 400 Pipe Fittings, which are joined to the pipe via way of a fillet weld within the place of the center of the alloy. Meanwhile, this Monel UNS N04400 End Cap Pipe Fittings. in inches is equal to the powerful thread period this is being measured just like the league, from the primary to the primary thread without the points. On the other hand, first thread on this product is defined because the junction of the important period of the thread by means of having the aid of the pedestal of the point. This steel is utilized in distinctive industries which encompass shipbuilding, petrochemical plants, energy generation, oil refineries, etc.
Monel WNR 2.4361 Dish Cap Pipe Fittings is likewise utilized in paper mills, waste water remedy plants, pharmaceutical plants, turnkey initiatives and others. This steel can be welded within the place of the joint after assemblage; however this isn’t properly thought-out as an inexpensive manner of elevating its functions. Meanwhile, at instances this steel is as properly used as one with the aid of the threaded link. The width of the left over bore of this product is comparable because the internal diameter of the pipe. They are via way of and huge utilized in excessive strain structures and are suitable for hot or cold temperatures.
Nickel Alloy 400 Tee Pipe Fittings is a strain maintaining alloy with the aid of one open give up and one strong give up joined within the business enterprise of a tie-bar. In standard process, the open give up shapes seals in this steel permit normal waft of flowing at some stage in the pipe work. However, if the strong give up of this steel is being moved to and fro into its vicinity it efficaciously cleans of the pipe and prevents the development of the waft. This product are drastically used specially situations with the aid of their fundamental advantage being that they may be joined to the pipe and not using a welding.
Specifications | ASTM B366/ ASME SB366 |
---|---|
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Size | Seamless Fittings : 1/2" - 10" Welded Fittings : 1/2" - 48" |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 400 Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 400 Buttweld Fitting |
Connection | Welding |
Manufacturing Process | Push, Press, Forge, Cast, etc. |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Specialized Manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME Sb-366 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Stainless steel butt-welding fittings |
MSS SP-43 | Wrought stainless steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Looking to Buy Monel 400 Pipe Fittings from Suppliers, Ask For ready stock of UNS N04400 Pipe Elbow in Mumbai, India.
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
125-200 | 5-8 | +2.4/-1.6 | |||||||||||
250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
650-750 | 26-30 | ||||||||||||
4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
800-1200 | 32-48 | ||||||||||||
1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |