Products
316 SS Seamless Fittings
SS 316L Welded Fittings
SS 316 Pipe Fittings
- Phone +91 8080256582
- Email: sales@indiasteelindustries.com
Equivalent Grades
UNS S31600 / S31603
1.4401 / 1.4404
SUS 316 / 316L
1.4401 / 1.4404
SUS 316 / 316L
Forms
Elbow
Tee / Cross
Reducer
Tee / Cross
Reducer
Standard Specifications
ASTM A403
ASME SA403
ANSI B16.9
ASME SA403
ANSI B16.9
SS 316 Pipe Cap, Stainless Steel 316 Buttweld Fittings, SS 316L Pipe Fittings, 1.4401 Buttweld Fittings, SS 316 Tee Stockist, UNS S31600 Reducer Manufacturer in India.
Athlete Piping Solution is a recognised manufacturer and seller of Stainless Steel 316 Pipe Fittings / Stainless Steel 316L Pipe Fittings, which is suitable add-ons which can be considerably utilized in numerous commercial zones in fitting. Stainless Steel UNS S31600 Pipe Fittings is made from varied grades of standard degrees and meets its phrases via countrywide and international standards. This product are very a great deal smooth to put in and remove, and are available in exceptional technical specs of threading and sizes as according to requirement. When we are saying with reference to this Stainless Steel WNR 1.4401 Pipe Fittings, it indicates the period of a pipe by way of razor sharp bend in it. This product is regularly utilized in beneath stress home equipment and is available in exceptional shapes and sizes for the utilization in different sorts of applications.
ASTM A403 SS 316L Buttweld Fittings, SS 316L 90 Deg. Elbow, Stainless Steel 316L Pipe Fittings, SS 316 3D Elbow, ANSI B16.9 SS 316L SR Elbow, 316 Stainless Steel Stub End, Stainless Steel 316 Elbow Supplier in Mumbai, India.
Alloy 316 Pipe Fittings is being believed that pass tee by means of and big produces a hovering pressure on pipe as and while temperature changes, for the purpose that they're in truth on the midpoint of correlation points. They are in fact was immediately stop pipe or hose in shape. Meanwhile, utilization of this Stainless Steel UNS S31603 Pipe Fittings improves the path or go with the drift of fluids within the piping systems. This steel, that is one of the maximum famous classes in fittings, is a dimension in lengthwise of an immediately pipe by way of male strings on each the ends.
In short, this Stainless Steel WNR 1.4404 Pipe Fittings are a coupling threaded or connector on each the ends. Meanwhile, this steel are normally used to permit plumbing to be connected to a few different plumbing or as a minimum to a water heater. The working pressure of these Alloy 316L Pipe Fittings will vary via the development and length of the pipe, the wide variety and form of clamps, the temperature and gadgets being positioned across. This steel are longer than reducers, and are getting used extra at period in better stress functions.
Specification of Stainless Steel 316 / 316L Pipe Fittings
| Specifications | ASTM A403/ ASME SA403 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Size | Seamless Fittings : 1/2" - 10" Welded Fittings : 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP316 / 316L Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 WP 316 / 316L Buttweld Fitting |
| Connection | Welding |
| Manufacturing Process | Push, Press, Forge, Cast, etc. |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Specialized Manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
Equivalent Grades Stainless Steel 316 / 316L Buttweld Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Various Types of 316 / 316L Stainless Steel Pipe Fittings
Stainless Steel 316 / 316L Elbow
Stainless Steel 316 / 316L Buttweld Tee
Stainless Steel 316 / 316L Cross
Stainless Steel 316 / 316L Reducer
Stainless Steel 316 / 316L Stub End
Stainless Steel 316 / 316L Pipe Cap
Stainless Steel 316 / 316L Pipe Nipple
Stainless Steel 316 / 316L Pipe Bend
Stainless Steel 316 / 316L Piggable Bend
316 / 316L SS Buttweld Fittings International Standards
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Looking to Buy SS 316L Pipe Fittings from Suppliers, Ask For ready stock of UNS S31603 Pipe Elbow in Mumbai, India.
Stainless Steel 316 / 316L Buttweld Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 316 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
| SS 316L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.89 min |
SS 316 / 316L Pipe Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Stainless Steel 316 / 316L Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Tolerance Chart of SS 316 / 316L Buttweld Fittings
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Ready Stock of Stainless Steel 316 / 316L Pipe Fittings
- SS 316 1D Elbow/3D Elbow/5D Elbow
- Stainless Steel 316 Buttweld Elbow
- SS 316 Eccentric Reducer
- 316 Stainless Steel 90° Elbow
- SS WERKSTOFF NR. 1.4404 Reducing Tee
- 316 Stainless Steel Reducer
- ANSI B16.9 316L SS Long Radius Elbow
- Stainless Steel 316 Equal Tee
- Schedule 80 SS 316 Grade Long Stub End
- Stainless Steel 316L Lateral Tee
- SS WERKSTOFF NR. 1.4401 Pipe Fittings
- Stainless Steel 316L Concentric Reducer
- 316L Stainless Steel Lap Joint Stub End
- Stainless Steel 316L 45° Elbow
- SS UNS S31600 Reducer
- 316L SS Short Stub End
- Stainless Steel 316L Long Stub End
- Sch 80 Stainless Steel 316L Pipe Fittings
- Stainless Steel 316 Elbow
- SS UNS S31603 Equal Tee
- 316 Stainless Steel 180° Elbow
- ASTM A403 316L Stainless Steel Buttweld Fittings
- 15 NB SCH 10 SS 316L 90° Short Radius Elbow
- 316L Stainless Steel U Bend
- SS WNR. 1.4436 Short Radius Elbow
- 316 SS End Pipe Cap
- Stainless Steel 316L Bend
- SS WERKSTOFF NR. 1.4435 Barrel Nipple
- Stainless Steel 316L End Cap
- ASTM A403 Gr. 316 SS Piggable Bend
- SS 316L Long Radius Bend
- Stainless Steel 316 Pipe Elbow
- SS UNS S31603 5D Bend
- ANSI B16.9 316 SS 180° Return Bends
- SS 316 Stub End
- 316L SS Reducing Cross
- SS UNS S31600 Reducing Nipple
- ASME B16.9 316 Stainless Steel Elbow
- 316L SS Equal Cross
- SS 316 Pipe End Cap
- ASTM A403 SS 316L Unequal Tee
- SCH 60 316 Stainless Steel Pipe Nipples
- SS 316 180D Bend
- 316L Stainless Steel Straight Tees
316 / 316L SS Pipe Fittings Export Destinations
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |
Get An Easy Quotation
Manufacturer Of Stainless Steel 304L Pipe Fittings.