Products
321H SS Elbow
SS 321H Cross / Tee
SS 321H Coupling
- Phone +91 8080256582
- Email: sales@indiasteelindustries.com
Equivalent Grades
UNS S32109
1.4878
SUS 321H
1.4878
SUS 321H
Forms
Elbow
Cross / Tee
Coupling
Cross / Tee
Coupling
Standard Specifications
ASTM A182
ASME SA182
ANSI B16.9
ASME SA182
ANSI B16.9
SS 321H Socket Weld Cross, 1.4878 Socket Weld Coupling, Stainless Steel 321H Socket Weld 90 Degree Elbow, UNS S32109 Socket Weld Elbow, SS 321H Socket Weld Fittings, SS 321H Socket Weld Tee Stockist Manufacturer in India.
Athlete Piping Solution is a well-known exporter and seller of Stainless Steel 321H Socket Weld Fittings, which acquires maximum heat resistance and corrosion within the route of hardening. However, this specific corrosion resistance of this Stainless Steel UNS S32109 Socket Weld Cross Fittings can similarly be advanced through a chain of techniques including tempering, sprucing and hardening. Meanwhile, tempering and quenching can harden these products, which might be through and huge used for home equipment that contain moderate corrosion, excessive strength and heat resistance. Also, it is much less proof against corrosion while as compared to that of different austenitic grades. The functioning temperatures of these products are again and again getting tormented by their lack of efficiency at multiplied temperatures, due to over-tempering and lack of ductility at sub-zero temperatures.
Stainless Steel 321H Forged Socket Weld Nipple, SS 321H 45 Deg Socket Weld Elbow, Stainless Steel 321H Socket Weld Union, ASTM A182 SS 321H Socket Weld Fittings, 321H Stainless Steel High Pressure Socket Weld Fittings, SS 321H 3D Socket Weld Cap, ANSI B16.9 SS 321H Socket Weld Boss Supplier in Mumbai, India.
Meanwhile, Stainless Steel WNR 1.4878 Socket Weld Cap Fittings has a few tremendous scaling resistance at temperatures of as much as 650 Deg Celsius. It is pretty proof against steam, food, hot gases, alkalis and moderate acids, dry air and sparkling water. However, the mechanical traits of this specific alloy will generally tend to condense at temperatures that variety from four hundred Deg Celsius to 580 Deg Celsius. They are used appreciably for distinctive applications including in Bolts, screws, bushings and nuts, Shafts, pumps and valves, Petroleum fractionating structures, Gas turbines, Mine ladder rungs, and so on.
Alloy 321H Socket Weld Coupling Fittings is heat resistant and ferrite steel this is being characterized through its resistance sulphur bearing gasses. However, smooth surface end on this steel gives higher overall performance of steels. Because of its advanced content material of chromium content material, it is extra proof against multiplied temperature oxidation, however is much less resistant, which holds even extra chromium. It is extraordinarily proof against oxidising sulphur bearing gases and indicates much less to a few extent, however nevertheless first-rate, resistance to sulphur bearing gasses in dipping atmospheres. Meanwhile, this specific grade of this steel is proof against scaling in air for as much as temperatures of One Thousand Deg Celsius.
Specification of Stainless Steel 321H Socket Weld Fittings
| Specifications | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/8″ NB to 4″ NB Socket Weld |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | 3000/ 6000/ 9000lbs |
| From | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Inserts, Caps, Nipples, Unions, Equal Tees & Reducing Tees. |
Equivalent Grades Stainless Steel 321H Socket Weld Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321H | 1.4878 | S32109 | SUS 321H | X12CrNiTi18-9 |
Various Types of 321H Stainless Steel Socket Weld Fittings
Stainless Steel 321H Elbow
Stainless Steel 321H Weld Tee
Stainless Steel 321H Weld Cross
Stainless Steel 321H Weld Coupling
Stainless Steel 321H Weld Cap
Stainless Steel 321H Weld Union
321H SS Socket Weld Fittings International Standards
| American Steel Socket Weld Fittings Standard | |
| Standard Code | Standard Name |
| ANSI ASME SA-182 | Forged fittings |
| ANSI ASME B16.11 | Socket-welding forged fittings |
| MSS SP-79 | Socket-welding reducing Inserts |
| MSS SP-83 | Class 3000 steel socket-welding and Socket Weld unions |
| MSS SP-95 | Swaged nipples and round plugs |
| MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
Looking to Buy SS 321H Socket Weld Fittings from Suppliers, Ask For ready stock of UNS S32109 Weld Elbow in Mumbai, India.
Stainless Steel 321H Socket Weld Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 0.10 max | 9.00 – 12.00 | 4(C+N) – 0.70 max |
SS 321H Socket Weld Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Stainless Steel 321H Socket Weld Fittings Dimensions In MM
| Nominal Pipe Size | 3000 PSI Rating | 6000 PSI Rating | |||||||||||
| IN | MM | Socket Bore B • | Socket Depth D | Socket Thickness | A | Body Bore * | G | Socket Thickness | A | Body Bore * | G | ||
| Average | MIN | Average | MIN | ||||||||||
| 1/4 | 06 | 14.1 | 09.65 | 3.78 | 3.30 | 11.2 | 10.0 | 3.02 | 04.60 | 4.00 | 13.5 | 07.10 | 3.68 |
| 3/8 | 10 | 17.5 | 09.65 | 4.00 | 3.50 | 13.5 | 13.3 | 3.20 | 05.03 | 4.37 | 15.8 | 09.90 | 4.00 |
| 1/2 | 15 | 21.7 | 09.65 | 4.67 | 4.10 | 15.8 | 16.6 | 3.75 | 05.97 | 5.18 | 19.0 | 12.06 | 4.78 |
| 3/4 | 20 | 27.0 | 09.65 | 4.90 | 4.27 | 19.0 | 21.7 | 3,91 | 06.96 | 6.05 | 22.3 | 1603 | 5.56 |
| 1 | 25 | 33.8 | 12.07 | 5.70 | 4.98 | 22.3 | 27.4 | 4.55 | 07.92 | 6.93 | 27.0 | 21.05 | 6.35 |
| 1 1/4 | 32 | 42.5 | 12.07 | 6.04 | 5.28 | 27.0 | 65.8 | 4.85 | 07.92 | 6.93 | 31.8 | 30.02 | 6.35 |
| 1 1/2 | 40 | 48.6 | 12.07 | 6.35 | 5.54 | 31.8 | 41.7 | 5.08 | 08.92 | 7.80 | 38.0 | 34.07 | 7.15 |
| 2 | 50 | 61.1 | 12.07 | 6.93 | 6,06 | 38.0 | 53.3 | 5.54 | 10.92 | 9.52 | 41.2 | 43.06 | 8.75 |
| 2 1/2 | 65 | 73.8 | 15.08 | 8.76 | 7.67 | 41.2 | 64.2 | 7.00 | |||||
| 3 | 80 | 89.8 | 15.08 | 9.50 | 8.30 | 57.2 | - | 7.68 | |||||
Weight Chart of SS 321H Socket Weld Fittings
| Pipe Size | A | B | QTY | Weight Chart |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
Ready Stock of Stainless Steel 321H Socket Weld Fittings
- Stainless Steel 321H Socket weld Forged Plug
- Sch 80 SS 321H 45 Deg Socket Weld Elbow
- Stainless Steel 321H Socket weld Half Coupling
- 321H Stainless Steel Socket weld Reducing Tee
- Stainless Steel S32109 Socket Weld Union
- SS 321H Socket Weld 90 Degree Elbow
- Stainless Steel 321H Socket Weld Fittings
- ANSI B16.9 321H SS Socket Weld Boss
- SS WERKSTOFF NR. 1.4878 Socket Weld Fittings Exporter
- Stainless Steel 321H Socket weld Forged Nipple
- 321H Stainless Steel Socket weld Fittings Stockholder
- Schedule 80 SS 321H Socket weld Fittings
- SS 321H Socket weld Adapter
- 321H Stainless Steel Socket weld Full Coupling
- SS WERKSTOFF NR. 1.4878 Socket weld Fittings Stockist
- Stainless Steel 321H Socket weld Equal Tee
- SS UNS S32109 Socket Weld Fittings
- 321H Stainless Steel Socket weld Bull Plug
- Stainless Steel 321H Socket weld Unequal Tee
- ASTM A182 321H Stainless Steel Socket Weld Fittings
- SS 321H Socket weld Boss
- 321H SS Socket weld Fittings Manufacturer
- SS 321H Industrial Socket Weld Fittings
- 321H SS Socket weld Pipe Cap
- 15 NB SCH 10 SS 321H Socket Weld Fittings
- SS 321H Socket weld Reducing Cross
- SS WNR. 1.4878 Socket weld 90 deg Elbow
- ASME B16.9 321H Socket Weld Cap
- 321H SS Socket Weld Fittings
- ASTM A182 SS 321H Socket weld Coupling
- Stainless Steel 321H Socket weld Fittings
- SS UNS S32109 Socket Weld Elbow
- ASTM A182 Gr. 321H SS Socket Weld Fittings
- SS 321H Socket Weld Welding Boss
- Stainless Steel 321H Socket Weld Fittings Stockist
- ANSI B16.9 321H SS Socket weld Tee Manufacturer
- SS UNS S32109 Socket weld Fittings
- Stainless Steel 321H Socket Weld 45 deg Elbow
- 321H Stainless Steel weld Cross Distributor
- SS WERKSTOFF NR. 1.4878 Socket weld Fittings
- 321H Stainless Steel Socket Weld Pipe Nipple
- SCH 60 321H Stainless Steel Socket Weld Plug
321H SS Socket Weld Fittings Export Destinations
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |
Get An Easy Quotation
Manufacturer Of Stainless Steel 321H Socket Weld Fittings