Get a quote

Super Duplex Steel F55 / F60 Flanges

Products F55 SDSS Threaded Flanges
SDSS F60 Blind Flanges
Equivalent Grades UNS S32750
1.4410
Grade F60
Forms Weldo
Groove / Tongue
Sorf
Standard Specifications ASTM A182
ASME SA182
ANSI B16.9

UNS S32760 Lap Joint Flanges, Super Duplex Steel F60 Slip On Flanges, Super Duplex Grade F55 Blind Flanges, SDSS F55 Flanges, 1.4462 Threaded Flanges, Super Duplex 2507 Socket Weld Flanges Stockist Manufacturer in India.

Athlete Piping Solution is a known distributor and exporter of Super Duplex Steel F55 / F60 Flanges, which has extraordinarily excessive ferrite. Super Duplex Steel UNS S32760 Slip On Flanges is getting used for specific applications along with for welding business natural alloys. It is used to cowl low and moderate form of alloy steels. This steel is getting used for specific applications along with for welding nearly identical alloys, superimpose and thermal spraying. It is a ferrite steel which additionally gives first-rate ductility in heat dealt with circumstance. This steel is getting used for specific applications along with for welding wrought and solid material of virtually identical form of chemical composition. It is as nicely used as superimpose on carbon steels to withstand corrosion, abrasion or erosion.


SAF 2507 Ring Type Joint Flanges, Super Duplex Stainless Steel F55 Sorf Flanges, High Quality F60 Super Duplex Steel Spectacle Blind Flanges, Super Duplex Grade F55 Orifice Flanges, ANSI B16.9 SDSS F55 Long Weld Neck Flanges, SDSS F60 Threaded Flanges, ASTM A182 SDSS F60 Flanges Supplier in Mumbai, India.

Super Duplex Steel WNR 1.4501 Blind Flanges is getting used for specific applications along with for welding nearly identical form of metals. This steel is likewise used for manufacture of system that handles sulphuric acid and chloride retaining media. Also, this steel is used for Niobium stabilized for to reduce down the opportunity of chromium carbide precipitation and consequential intergranular corrosion. It is getting used for specific applications along with for welding identical metals in solid and wrought forms. Also, this steel has a few suitable corrosion resistance to an in depth variety of chemical environments.

Super Duplex Steel 2507 Spectacle Blind Flanges extensively utilized for welding Ti or Nb stabilized stainless CrNiMo steels. The including up of Nb on this product decreases the probability of intergranular Cr carbide precipitation and consequently vulnerability to intergranular corrosion. This product is getting used for specific applications along with for welding parallel steels, and additionally gives better resistance to pitting and crevice corrosion. Also, decrease carbon on this product makes the weld steel much less prone to inter-granular corrosion. It is getting used for specific applications along with for low carbon of steel within the organization of better silicon content. The excessive silicon on this product lets in better arc fidelity collectively with minimal post-weld grinding.

Specification of Super Duplex Steel F55 / F60 Flanges

Specifications ASTM A182 / ASME SA182
Flanges size 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Flanges Dimensions ANSI/ASME B16.9, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange.
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Manufacturing Standards ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc
B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)
Any other specilised Flange
DIN: DIN 2527, DIN 2566, DIN 2573, UNS S45367 Flange, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Flanges uses & application Nuclear power (mostly seamless).
Petrochemicals and acids.
Bitumen upgraders.
Heavy oil refineries.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175.

Equivalent Grades Super Duplex Steel F55 / F60 Flanges

STANDARD UNS WERKSTOFF NR.
Super Duplex Steel F55 / F60 S32750 / S32760 1.4410

Various Types of F55 / F60 Super Duplex Steel Flanges

Super Duplex Steel F55 / F60 Blind Flanges
Super Duplex Steel F55 / F60 Blind Flanges
Super Duplex Steel F55 / F60 Ring Type Joint Flange
Super Duplex Steel F55 / F60 Ring Type Joint Flange
Super Duplex Steel F55 / F60 Weld Neck Flanges
Super Duplex Steel F55 / F60 Weld Neck Flanges
Super Duplex Steel F55 / F60 Socket Weld Flanges
Super Duplex Steel F55 / F60 Socket weld Flanges
Super Duplex Steel F55 / F60 Lapped Joint Flanges
Super Duplex Steel F55 / F60 Lapped Joint Flanges
Super Duplex Steel F55 / F60 Slip On Flanges
Super Duplex Steel F55 / F60 Slip On Flanges

F55 / F60 SDSS Flanges International Standards

American Standard Standard Code ANSI ASME SA-182 ANSI ASME B16.9 ASME – B 16.47 ASME – B 16.36    
Standard Name Forged Flanges Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange Welding neck flange, Blind flange Welding neck flange Slip on flange    
German Standard DIN 2527 DIN 2573 / 2576 DIN 2673 DIN 2641 / 2642 DIN 28115 DIN PN10, PN16 DIN PN20, PN25
Steel Blind Flanges, BLRF Flat Flange for Welding (Slip On) Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) Lapped / Loose (Lap Joint) Flanges Plain Collars Long Neck Welding Flanges PN10 Flanges, DIN PN 10 Flanges, PN16 Flange PN20 Flanges, DIN PN 25 Flanges
Japanese Standard JIS B2220 JIS B2291 JIS 5K, 10K JIS 16K, 20K JIS 30K, 40K    
Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) 5K SORF Flanges, 10K SOFF Flanges 16K Blind Flanges, 20K BLRF Flanges 30K Slip on Flanges, 40K Blind Flanges    
Italian Standard UNI FLANGES            
Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)            
British Standard BS 10 Table D BS 10 Table E BS 10 Table F BS 10 Table H      
BS 10 Table D Flanges, Table D Pipe Flange BS 10 Table E Flanges, Table E Pipe Flange BS 10 Table E Flanges, Table E Flanges BS 10 Table E Flanges, Table E Pipe Flanges      

Looking to Buy SDSS F55 / F60 Flanges from Suppliers, Ask For ready stock of UNS S32760 Blind Flanges in Mumbai, India.

Super Duplex Steel F55 / F60 Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Fe
Duplex F55 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22 – 23 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min
F60 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 21.0 – 23.0 2.50 - 3.50 4.50 – 6.50 0.8 – 0.20 63.54 min

SDSS F55 / F60 Flanges Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Size Chart Of Super Duplex Steel F55 / F60 Flange

Nominal Pipe Size Outside Diameter of Flanges Thickness of Flanges Diameter of Raised Face Diameter of Hub at Base Length Thru Hub Diameter or Bore Diameter of Hub at Bevel Radius of Fillet Depth of Socket
Welding Neck Slip-On Threaded Socket Lap Joint Slip-on Socket Lap Joint
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Weight Chart Of Super Duplex Steel F55 / F60 Flanges

Pipe Normal Diam. O.D. Flange  Thk. Of Flange Min  Diam.
of
Hub 		 Diameter of Raised Face  Length Hub.Y Thread Length Diam. 
of Bolt
Circle		 Diam. 
of Bolt
Holes		 Number
of Bolts		 Diam. of
Bolts
(inch)		 KG LB
inch dn O C X G Y T BC BH BN BD
1/2" 15 89.00 11.20 30.20 35.10 15.70 15.70 60.50 15.80 4 1/2" 0.4 0.9
3/4" 20 98.50 12.70 38.10 42.90 15.70 15.70 69.90 15.80 4 1/2" 0.7 1.5
1" 25 108.00 14.20 49.30 50.80 17.50 17.50 79.30 15.80 4 1/2" 0.8 1.8
1-1/4" 32 117.50 15.70 58.70 63.50 20.60 20.60 88.90 15.80 4 1/2" 1.2 2.6
1-1/2" 40 127.00 17.50 65.00 73.20 22.40 22.40 98.60 15.80 4 1/2" 1.5 3.3
2" 50 152.50 19.10 77.70 91.90 25.40 25.40 120.70 19.10 4 5/8" 2.3 5.1
2-1/2" 65 178.00 22.40 90.40 104.60 28.40 28.40 139.70 19.10 4 5/8" 3.7 8.1
3" 80 190.50 23.90 108.00 127.00 30.20 30.20 152.40 19.10 4 5/8" 4.1 9
3-1/2" 90 216.00 23.90 122.20 139.70 31.80 31.80 177.80 19.10 8 5/8" 5.1 11.2
4" 100 228.50 23.90 134.90 157.20 33.30 33.30 190.50 19.10 8 5/8" 5.9 13
5" 125 254.00 23.90 163.60 185.70 36.60 36.60 215.90 22.40 8 3/4" 7 15.4
6" 150 279.50 25.40 192.00 215.90 39.60 39.60 241.30 22.40 8 3/4" 8.4 18.5
8" 200 343.00 28.40 246.10 269.70 44.50 44.50 298.50 22.40 8 3/4" 13 28.6
10" 250 406.50 30.20 304.80 323.90 49.30 49.30 362.00 25.40 12 7/8" 18 39.5
12" 300 482.50 31.80 365.30 381.00 55.60 55.60 431.80 25.40 12 7/8" 29 64
14" 350 533.50 35.10 400.10 412.80 57.20 57.20 476.30 28.50 12 1" 39 86
16" 400 597.00 36.60 457.20 469.90 63.50 63.50 539.80 28.50 16 1" 47 103
18" 450 635.00 39.60 505.00 533.40 68.30 68.30 577.90 31.80 16 1 1/8" 57 126
20" 500 698.50 42.90 558.80 584.20 73.20 73.20 635.00 31.80 20 1 1/8" 76 167
24" 600 813.00 47.80 663.40 692.20 82.60 82.60 749.30 35.10 20 1 1/4" 97 214

Ready Stock of Super Duplex Steel F55 / F60 Flanges

  • High Quality F60 Super Duplex Steel Plate Flanges
  • ASTM A182 F60 SDSS Weld Neck Flanges
  • Super Duplex Stainless Steel F60 Male & Female Flanges
  • F60 Super Duplex Steel BLRTJ Flanges
  • SDSS WERKSTOFF NR. 1.4410 Threaded Flanges
  • Super Duplex Grade F60 Long Weld Neck Flanges
  • ASME SA182 Super Duplex F60 Short Pipe Flanges Stockist
  • Super Duplex Grade F55 Puddle Flanges
  • SDSS F55 Lapped Joint Flanges
  • Super Duplex Stainless Steel F55 Raised Face Flanges
  • ANSI B16.9 F55 SDSS Nippolet Flange
  • Super Duplex 2507 WNRF Flanges
  • High Quality F55 Super Duplex Steel SWRF Flanges
  • SDSS UNS S32750 Tongue & Groove Flange
  • Super Duplex Steel F55 Flanges
  • SDSS UNS S32760 Welding Neck Flanges Supplier in Mumbai
  • Super Duplex Steel F60 Weld Neck Flanges
  • F55 Super Duplex Steel EN 1092-1 Flange
  • SDSS WERKSTOFF NR. 1.4410 Hydraulic SAE Flanges
  • Super Duplex Steel F55 PN16 Flanges Exporter
  • High Quality F55 Super Duplex Steel SWRF Flanges
  • F60 SDSS Expander Flanges
  • ASTM A182 Super Duplex Steel F55 BLRF Flanges
  • Super Duplex Steel F60 Raised Face Flanges
  • SDSS F55 Orifice Flanges
  • High Quality F60 Super Duplex Steel Industrial Flange
  • SDSS UNS S32760 Loose Flanges Manufacturer
  • Super Duplex Grade F60 BLRF Flanges
  • ANSI B16.9 Super Duplex Steel F60 Reducing Flanges
  • Super Duplex Stainless Steel F60 Pipe Flanges
  • ASME B16.9 F60 Super Duplex Steel Flanges Stockholder
  • SAF 2507 Spectacle Blind Flanges
  • F55 Super Duplex Steel Loose Flanges
  • ASTM A182 SDSS F55 Plate Flanges
  • Super Duplex Steel F55 90° Short Radius Elbow
  • SDSS WERKSTOFF NR. 1.4410 Flanges
  • F60 Super Duplex Steel Threaded Flanges
  • SDSS UNS S32750 Orifice Flanges Stockist
  • Super Duplex Stainless Steel F55 Ring Type Joint Flange
  • F55 SDSS Screwed Flanges
  • SDSS WNR. 1.4410 Forged Flanges
  • Super Duplex Grade F55 RTJ Flanges

F55 / F60 SDSS Flanges Export Destinations

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Get An Easy Quotation

Manufacturer Of Super Duplex Steel F55 / F60 Flanges.
Call Us Any Time:
+91 8080256582 or
Get in Touch