Athlete Piping Solution is a branded trader and seller of Super Duplex S32750 / S32760 Threaded Fittings, which is a non-magnetic austenitic as a result cannot be differentiated the use of magnetic testing. Super Duplex 2507 Threaded Union Fittings belongs to the low nickel and excessive manganese stainless steel, the nickel content material is usually beneath 4 %, 8 % of the manganese content material is a phase of nickel steel. This steel has its personal specialties in phrases of its chemical mixture that consists of carbon, chromium, molybdenum, manganese, nickel and phosphorous and different elements. It is a sort of Cr-Ni-Mn stainless with comparable properties different steels. The sturdiness of this alloy at low temperatures is extraordinary. It could be very less expensive so we are able to use it in indoor applications like indoor fabrication, vehicle trim and application in which environment isn't always a sizeable factor.
The variety of these Alloy 2507 Threaded Plug Fittings is utilized in production clinical device, aerospace products, semiconductors and heat exchanger. It has extraordinary fabrication performance, which includes deep-drawing. The offered steel additionally reveals a vast application in chemical, petroleum and electronics industries. It is one of the maximum broadly used precipitation hardening grades, and possesses accurate corrosion resistance, sturdiness, excessive harness, and strength. In present work we use gas tungsten arc welding (GTAW) manner to weld this steel, which may be offered at very reasonable rates from us.
Super Duplex WNR 1.4410 Threaded Bushing Fittings is a phase with accurate mechanical properties of corrosion resistance. GTAW manner benefits the welded joint of this alloy with most strength and higher deposition rate. We produce top class products that follow excessive nice standards that are the world over identified image of a company’s dedication to advance agreeable. Moreover, our offered products are broadly recounted for its amazing nice and compliance, excessive performance, sturdiness and sturdiness. Also, offered products are synthetic by means of our skilled specialists the use of nice accepted raw material and ultra-present day technology.
Specifications | ASTM A182 / ASME SA182 |
---|---|
Size | 1/8″ NB to 4″ NB Screwed-Threaded |
Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Class | 2000lb/ 3000lb/ 6000lbs |
From | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, Unions, Equal Tees & Reducing Tees, Plugs. |
STANDARD | WERKSTOFF NR. | UNS |
Super Duplex 2507 | 1.4410 | S32750 / S32760 |
American Steel Threaded Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-182 | Forged fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
Looking to Buy SDSS S32750 Threaded Fittings from Suppliers, Ask For ready stock of UNS S32760 Threaded Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S32750 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
S32760 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 - 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
S32750 / S32760 | 7.805 | 0.285 | 1420 – 1465 | 2588 – 2669 |
DN | NPS | Center to End NPT Elbow, NPT Tee, NPT Cross A |
Center to End 45 Deg Elbow C |
O.D. of Band H |
Min. Wall Thick. G |
Length of Thread. Minimum (1) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
25 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1-1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1-1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 86 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2-1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
85 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
DN | NPS | End to End Couplings W |
End to End Caps P |
O.D. D | End Wall Thick. G Minimum |
Length of Thread. Minimum (1) |
||||
---|---|---|---|---|---|---|---|---|---|---|
Class 3000&Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 32 | 19 | … | 16 | 22 | 4.8 | … | 6.4 | 6.7 |
8 | 1/4 | 35 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
10 | 3/8 | 38 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
15 | 1/2 | 48 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
20 | 3/4 | 51 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
25 | 1 | 60 | 41 | 43 | 44 | 57 | 9.7 | 11.2 | 14.7 | 17.3 |
32 | 1-1/4 | 67 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17.0 | 18.0 |
40 | 1-1/2 | 79 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
50 | 2 | 86 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
65 | 2-1/2 | 92 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
80 | 3 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
100 | 4 | 121 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Pressure-Temperature | |||||
---|---|---|---|---|---|
Temperature | Class | ||||
150 | 300 | ||||
1/4 – 1 inch. | 1 1/4 – 2 inch. | 2 1/2 – 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | – | 935 | 750 | 560 |
450 | 232 | – | 725 | 600 | 475 |
500 | 260 | – | 510 | 450 | 385 |
550 | 288 | – | 300 | 300 | 300 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |