Products
Incoloy 825 Seamless Fittings
825 Incoloy Pipe Fittings
- Phone +91 8080256582
- Email: sales@indiasteelindustries.com
Equivalent Grades
UNS N08825
2.4858
Grade 825
2.4858
Grade 825
Forms
Elbow
Tee / Cross
Reducer
Tee / Cross
Reducer
Standard Specifications
ASTM B366
ASME SB366
ANSI B16.9
ASME SB366
ANSI B16.9
UNS N08825 Reducer, Incoloy 825 Pipe Fittings, Nickel Alloy 825 Tee, 2.4858 Buttweld Fittings, Alloy 825 Pipe Cap, Incoloy® Alloy 825 Buttweld Fittings Stockist Manufacturer in India.
Athlete Piping Solution is a known supplier and stockist of Incoloy Alloy 825 Pipe Fittings, which has High creep strength and Good structural balance at excessive temperatures. Incoloy UNS N08825 Elbow Pipe Fittings is a variant and has a decrease carbon content material which improves weldability and lowers the danger of decreased corrosion resistance across the weld. It additionally has a barely decrease yield and tensile strength. Typical Applications of these products are as follows Moisture separator reheaters, feedwater tubes, Stator bars, Heat exchangers, and more. Industries predominantly using these products are like Nuclear and power, General engineering, etc. They aren't strong on the better temperatures where these alloys are used. They are immune to oxidation, sulphidation and carburisation. It is a grade combining super service properties at excessive temperatures easily of fabrication.
Nickel Alloy 825 90 Deg. Elbow, Incoloy® Alloy 825 Stub End, ANSI B16.9 Alloy 825 SR Elbow, Incoloy Alloy 825 Elbow, ASME B366 825 Incoloy Pipe Fittings, Monel Alloy 825 3D Elbow, ASTM SB366 Incoloy 825 Buttweld Fittings Supplier in Mumbai, India.
Incoloy WNR 2.4858 Long Radius Elbow Pipe Fittings is a medium alloy for excessive temperature applications together with furnace components and heat remedy equipment. We are able to now no longer simply generating even massive batches of fashionable in addition to non-fashionable, tailor made of these products, however as nicely focuses on production crucial fasteners. Further, this steel has its pulse at the technological up-gradations and improvements of its upcoming projects. Heat Treatment of these products are solution annealed through heating to temperature variety 1040 -1065 Degree C, maintaining at temperature till very well soaked, after which water quenching.
However, Nickel Alloy 825 Short Radius Elbow Pipe Fittings is going to be sensitised to intergranular corrosion after carrier at temperatures in variety 550 – 800 Degree C. It has appropriate resistance to oxidation in intermittent carrier in air as much as 1035 Degree C and 1050 Degree C in non-stop carrier. It does now no longer comprise molybdenum, so pitting resistance is pretty poor. Strength and hardness of this steel may be elevated through cold working. It has Good weldability, and Maximum working temperature through approx. 1150 Degree C (2100 Degree F). It additionally gives superb resistance to isothermal and, particularly, cyclic oxidation. It keeps its heat resistant properties through superior manipulate of micro alloy additions.
Specification of Incoloy 825 Pipe Fittings
| Specifications | ASTM B366/ ASME SB366 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Size | Seamless Fittings : 1/2" - 10" Welded Fittings : 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 825 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 825 Buttweld Fitting |
| Connection | Welding |
| Manufacturing Process | Push, Press, Forge, Cast, etc. |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Specialized Manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
Equivalent Grades Incoloy 825 Buttweld Pipe Fittings
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
| Incoloy 825 | N08825 | 2.4858 | NC22DNB4M | NiCr22Mo9Nb | NCF 825 | NA 21 | ЭП703 | ЭИ602 |
Various Types of 825 Incoloy Pipe Fittings
Incoloy 825 Elbow
Incoloy 825 Buttweld Tee
Incoloy 825 Cross
Incoloy 825 Reducer
Incoloy 825 Stub End
Incoloy 825 Pipe Cap
Incoloy 825 Pipe Nipple
Incoloy 825 Pipe Bend
Incoloy 825 Piggable Bend
Incoloy 825 Buttweld Fittings International Standards
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME Sb-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Looking to Buy Incoloy 825 Pipe Fittings from Suppliers, Ask For ready stock of UNS N08825 Pipe Elbow in Mumbai, India.
Incoloy 825 Buttweld Fittings Chemical Composition
| Grade | C | Mn | Si | S | Al | Ti | Fe | Ni | Cr |
| Incoloy 825 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | 0.40 max | 0.40 max | 5.0 max | 58.0 min | 20.0 – 23.0 |
Incoloy 825 Pipe Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Incoloy 825 Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Tolerance Chart of Incoloy 825 Buttweld Fittings
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-800 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Ready Stock of Incoloy 825 Pipe Fittings
- Incoloy UNS N08825 Equal Tee
- ASME SB366 825 Incoloy 90° Elbow
- Incoloy Alloy 825 Reducer
- Incoloy WERKSTOFF NR. 2.4858 Reducing Tee
- Nickel Alloy 825 Pipe Fittings
- Incoloy Alloy 825 Elbow
- Nickel Alloy 825 Concentric Reducer
- Incoloy 825 Buttweld Elbow
- 825 Incoloy 45° Elbow
- ANSI B16.9 Nickel Alloy 825 1D Elbow/3D Elbow/5D Elbow
- Alloy 825 Long Stub End
- Monel Alloy 825 Grade Long Stub End
- Incoloy UNS N08825 Reducer
- Incoloy® Alloy 825 Lateral Tee
- Incoloy 825 Equal Tee
- ASTM B366 825 Incoloy Buttweld Fittings
- Incoloy® Alloy 825 Lap Joint Stub End
- ANSI B16.9 Alloy 825 Long Radius Elbow
- Aloy 825 Eccentric Reducer
- Incoloy WERKSTOFF NR. 2.4858 Pipe Fittings
- Incnel 825 Short Stub End
- Monel Alloy 825 180° Elbow
- Monel Alloy 825 Pipe Elbow
- Incoloy Alloy 825 Stub End
- ASTM B366 Iconel Alloy 825 Piggable Bend
- Incoloy WERKSTOFF NR. 2.4858 Barrel Nipple
- Alloy 825 Equal Cross
- Incoloy UNS N08825 Reducing Nipple
- ASTM B366 825 Incoloy Unequal Tee
- Alloy 825 Long Radius Bend
- Monel Alloy 825 End Cap
- Nickel Alloy 825 180D Bend
- Incoloy® Alloy 825 90° Short Radius Elbow
- ASME SB366 825 Incoloy Straight Tees
- Incoloy Alloy 825 Bend
- Nickel Alloy 825 End Pipe Cap
- Incoloy WNR. 2.4858 Short Radius Elbow
- ASME B16.9 825 Incoloy Elbow
- Incoloy 825 Reducing Cross
- 825 Incoloy U Bend
- Incoloy UNS N08825 5D Bend
- Incoloy® Alloy 825 Pipe Nipples
- ANSI B16.9 Incoloy 825 180° Return Bends
- 825 Incoloy Pipe End Cap
Incoloy 825 Pipe Fittings Export Destinations
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |
Get An Easy Quotation
Manufacturer Of Stainless Steel 304 Pipe Fittings.