Products
601 Inconel Threaded Flanges
Inconel 601 Blind Flanges
- Phone +91 8080256582
- Email: sales@indiasteelindustries.com
Equivalent Grades
UNS N06601
2.4851
Grade 601
2.4851
Grade 601
Forms
Weldo
Groove / Tongue
Sorf
Groove / Tongue
Sorf
Standard Specifications
ASTM B564
ASME SB564
ANSI B16.9
ASME SB564
ANSI B16.9
Nickel Alloy 601 Slip On Flanges, UNS N06601 Lap Joint Flanges, Inconel 601 Flanges, 2.4851 Threaded Flanges, Alloy 601 Blind Flanges, Inconel® Alloy 601 Socket Weld Flanges Stockist Manufacturer in India.
Athlete Piping Solution is a known seller and exporter of Inconel Alloy 601 Flanges, which has outstanding resistance to an extensive sort of chemical environments. Strength on this Inconel UNS N06601 Lap Joint Flanges is acquired with the aid of using heat remedy, and for a fair higher strength it could additionally be cold worked. Strength on this steel is acquired with the aid of using heat remedy and also can be cold worked for even higher strength. There is likewise an excessive resistance in lowering and oxidizing environments of this steel and improved resistance to pitting and crevice corrosion in sea water and strain corrosion cracking. The number one characteristic of this steel is that of powerful survival below excessive-temperature, and excessive-strain carrier in a fairly to significantly corrosive. This steel additionally provide erosion-inclined surroundings wherein greater not unusual and much less pricey iron-primarily based totally alloys might fail.
ASTM B564 Alloy 601 Flanges, High Quality Inconel 601 Orifice Flanges, 601 Inconel Ring Type Joint Flanges, Inconel NCF 601 Spectacle Blind Flanges, ANSI B16.9 601 Inconel Long Weld Neck Flanges, Nickel Alloy 601 Threaded Flanges, Incoloy Alloy 601 Sorf Flanges Supplier in Mumbai, India.
Inconel WNR 2.4851 Ring Joint Type Flanges is one in every of few materials to face up to the corrosive results of moist chlorine fueloline, hypochlorite and chlorine dioxide. This product is utilized in several applications together with the strain vessels of a few nuclear reactors, chemical reactors, distillation equipment, and pipes and valves in chemical industry. Although a notable alloy, this product does enjoy degradation because of fabricating and handling. Electropolishing or passivation of this product can enhance corrosion resistance. This product are used for several applications together with Pollution manage stack liners, ducts, dampers, scrubbers, stack-fueloline reheaters, fanatics and fan housings.
Nickel Alloy 601 Spacer Flanges is likewise utilized in Flue fueloline desulfurization systems; Chemical processing additives like heat exchangers, response vessels, evaporators, and switch piping. This product is as nicely used for Sour fueloline wells; Pulp and paper production; Waste remedy; Pharmaceutical and food processing equipment; etc. This product is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have remarkable corrosion resistance in an extensive variety of extreme environments. The low carbon content material of this product minimizes carbide precipitation for the duration of welding to preserve corrosion resistance in as-welded structures.
Specification of Inconel 601 Flanges
| Specifications | ASTM B564 / ASME SB564 |
|---|---|
| Flanges size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Flanges Dimensions | ANSI/ASME B16.9, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange. |
| Class / Pressure | 150#, 300#, 601#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Manufacturing Standards | ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised Flange DIN: DIN 2527, DIN 2566, DIN 2573, UNS S45367 Flange, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276 |
| Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Flanges uses & application | Nuclear power (mostly seamless). Petrochemicals and acids. Bitumen upgraders. Heavy oil refineries. |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175. | |
Equivalent Grades Inconel 601 Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
Various Types of 601 Inconel Flanges
Inconel 601 Blind Flanges
Inconel 601 Ring Type Joint Flange
Inconel 601 Weld Neck Flanges
Inconel 601 Socket weld Flanges
Inconel 601 Lapped Joint Flanges
Inconel 601 Slip On Flanges
601 Inconel Flanges International Standards
| American Standard | Standard Code | ANSI ASME SB-564 | ANSI ASME B16.9 | ASME – B 16.47 | ASME – B 16.36 | ||
|---|---|---|---|---|---|---|---|
| Standard Name | Forged Flanges | Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange | Welding neck flange, Blind flange | Welding neck flange Slip on flange | |||
| German Standard | DIN 2527 | DIN 2573 / 2576 | DIN 2673 | DIN 2641 / 2642 | DIN 28115 | DIN PN10, PN16 | DIN PN20, PN25 |
| Steel Blind Flanges, BLRF | Flat Flange for Welding (Slip On) | Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) | Lapped / Loose (Lap Joint) Flanges Plain Collars | Long Neck Welding Flanges | PN10 Flanges, DIN PN 10 Flanges, PN16 Flange | PN20 Flanges, DIN PN 25 Flanges | |
| Japanese Standard | JIS B2220 | JIS B2291 | JIS 5K, 10K | JIS 16K, 20K | JIS 30K, 40K | ||
| Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) | Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) | 5K SORF Flanges, 10K SOFF Flanges | 16K Blind Flanges, 20K BLRF Flanges | 30K Slip on Flanges, 40K Blind Flanges | |||
| Italian Standard | UNI FLANGES | ||||||
| Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254) | |||||||
| British Standard | BS 10 Table D | BS 10 Table E | BS 10 Table F | BS 10 Table H | |||
| BS 10 Table D Flanges, Table D Pipe Flange | BS 10 Table E Flanges, Table E Pipe Flange | BS 10 Table E Flanges, Table E Flanges | BS 10 Table E Flanges, Table E Pipe Flanges |
Looking to Buy Inconel 601 Flanges from Suppliers, Ask For ready stock of UNS N06601 Blind Flanges in Mumbai, India.
Inconel 601 Flanges Chemical Composition
| Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 601 | 0.10 max | 1 max | 0.50 max | 1 max | 0.15 min | balance | – | 58.0-63.0 | 21.0–25.0 |
Inconel 601 Flanges Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Size Chart Of Inconel 601 Flange
| Nominal Pipe Size | Outside Diameter of Flanges | Thickness of Flanges | Diameter of Raised Face | Diameter of Hub at Base | Length Thru Hub | Diameter or Bore | Diameter of Hub at Bevel | Radius of Fillet | Depth of Socket | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Welding Neck | Slip-On Threaded Socket | Lap Joint | Slip-on Socket | Lap Joint | ||||||||
| O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
| 1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
| 3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
| 1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
| 1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
| 1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
| 2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
| 2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
| 3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
| 3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
| 4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
| 5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
| 6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
| 8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
| 10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
| 12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
| 14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
| 16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
| 18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
| 20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
| 24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
Weight Chart Of Inconel 601 Flanges
| Pipe Normal Diam. | O.D. Flange | Thk. Of Flange Min | Diam. of Hub |
Diameter of Raised Face | Length Hub.Y | Thread Length | Diam. of Bolt Circle |
Diam. of Bolt Holes |
Number of Bolts |
Diam. of Bolts (inch) |
KG | LB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| inch | dn | O | C | X | G | Y | T | BC | BH | BN | BD | ||
| 1/2" | 15 | 89.00 | 11.20 | 30.20 | 35.10 | 15.70 | 15.70 | 60.50 | 15.80 | 4 | 1/2" | 0.4 | 0.9 |
| 3/4" | 20 | 98.50 | 12.70 | 38.10 | 42.90 | 15.70 | 15.70 | 69.90 | 15.80 | 4 | 1/2" | 0.7 | 1.5 |
| 1" | 25 | 108.00 | 14.20 | 49.30 | 50.80 | 17.50 | 17.50 | 79.30 | 15.80 | 4 | 1/2" | 0.8 | 1.8 |
| 1-1/4" | 32 | 117.50 | 15.70 | 58.70 | 63.50 | 20.60 | 20.60 | 88.90 | 15.80 | 4 | 1/2" | 1.2 | 2.6 |
| 1-1/2" | 40 | 127.00 | 17.50 | 65.00 | 73.20 | 22.40 | 22.40 | 98.60 | 15.80 | 4 | 1/2" | 1.5 | 3.3 |
| 2" | 50 | 152.50 | 19.10 | 77.70 | 91.90 | 25.40 | 25.40 | 120.70 | 19.10 | 4 | 5/8" | 2.3 | 5.1 |
| 2-1/2" | 65 | 178.00 | 22.40 | 90.40 | 104.60 | 28.40 | 28.40 | 139.70 | 19.10 | 4 | 5/8" | 3.7 | 8.1 |
| 3" | 80 | 190.50 | 23.90 | 108.00 | 127.00 | 30.20 | 30.20 | 152.40 | 19.10 | 4 | 5/8" | 4.1 | 9 |
| 3-1/2" | 90 | 216.00 | 23.90 | 122.20 | 139.70 | 31.80 | 31.80 | 177.80 | 19.10 | 8 | 5/8" | 5.1 | 11.2 |
| 4" | 100 | 228.50 | 23.90 | 134.90 | 157.20 | 33.30 | 33.30 | 190.50 | 19.10 | 8 | 5/8" | 5.9 | 13 |
| 5" | 125 | 254.00 | 23.90 | 163.60 | 185.70 | 36.60 | 36.60 | 215.90 | 22.40 | 8 | 3/4" | 7 | 15.4 |
| 6" | 150 | 279.50 | 25.40 | 192.00 | 215.90 | 39.60 | 39.60 | 241.30 | 22.40 | 8 | 3/4" | 8.4 | 18.5 |
| 8" | 200 | 343.00 | 28.40 | 246.10 | 269.70 | 44.50 | 44.50 | 298.50 | 22.40 | 8 | 3/4" | 13 | 28.6 |
| 10" | 250 | 406.50 | 30.20 | 304.80 | 323.90 | 49.30 | 49.30 | 362.00 | 25.40 | 12 | 7/8" | 18 | 39.5 |
| 12" | 300 | 482.50 | 31.80 | 365.30 | 381.00 | 55.60 | 55.60 | 431.80 | 25.40 | 12 | 7/8" | 29 | 64 |
| 14" | 350 | 533.50 | 35.10 | 400.10 | 412.80 | 57.20 | 57.20 | 476.30 | 28.50 | 12 | 1" | 39 | 86 |
| 16" | 400 | 597.00 | 36.60 | 457.20 | 469.90 | 63.50 | 63.50 | 539.80 | 28.50 | 16 | 1" | 47 | 103 |
| 18" | 450 | 635.00 | 39.60 | 505.00 | 533.40 | 68.30 | 68.30 | 577.90 | 31.80 | 16 | 1 1/8" | 57 | 126 |
| 20" | 500 | 698.50 | 42.90 | 558.80 | 584.20 | 73.20 | 73.20 | 635.00 | 31.80 | 20 | 1 1/8" | 76 | 167 |
| 24" | 600 | 813.00 | 47.80 | 663.40 | 692.20 | 82.60 | 82.60 | 749.30 | 35.10 | 20 | 1 1/4" | 97 | 214 |
Ready Stock of Inconel 601 Flanges
- Inconel 601 Class 2500 Flange
- Inconel UNS N06601 Tongue & Groove Flange
- 601 Inconel WNRF Flanges
- Alloy 601 Weld Neck Flanges
- ANSI B16.9 Alloy 601 Nippolet Flange
- Inconel WERKSTOFF NR. 2.4851 Threaded Flanges
- EN NiCr23Fe Plate Flanges
- 601 Inconel Long Weld Neck Flanges
- Inconel® Alloy 601 Puddle Flanges
- 601 Alloy Lapped Joint Flanges
- Alloy 601 Short Pipe Flanges Stockist
- Inconel® Alloy 601 Male & Female Flanges
- ASTM B564 601 Inconel Weld Neck Flanges
- Inconel Alloy 601 Raised Face Flanges
- Inconel NCF 601 Flanges
- Nickel Alloy 601 BLRTJ Flanges
- Inconel UNS N06601 Welding Neck Flanges Supplier in Mumbai
- High Quality Inconel 601 SWRF Flanges
- Inconel Alloy 601 EN 1092-1 Flange
- Inconel WERKSTOFF NR. 2.4851 Hydraulic SAE Flanges
- Inconel 601 PN16 Flanges Exporter
- Inconel NCF 601 Loose Flanges
- N06601 Inconel Pipe Flanges
- Inconel WNR. 2.4851 Forged Flanges
- Inconel® Alloy 601 Ring Type Joint Flange
- Inconel Alloy 601 RTJ Flanges
- ANSI B16.9 Alloy 601 Reducing Flanges
- Nickel Alloy 601 BLRF Flanges
- Inconel UNS N06601 Loose Flanges Manufacturer
- Nickle Alloy 601 Screwed Flanges
- 601 Inconel Spectacle Blind Flanges
- High Quality Inconel 601 SWRF Flanges
- Inconel Alloy 601 Orifice Flanges
- High Quality Inconel 601 90° Short Radius Elbow
- Inconel 601 Industrial Flange
- ASME B16.9 601 Inconel Flanges Stockholder
- Inconel® Alloy 601 Expander Flanges
- Inconel WERKSTOFF NR. 2.4851 Flanges
- ASTM B564 Inconel 601 BLRF Flanges
- Inconel 601 Raised Face Flanges
- 601 Alloy Threaded Flanges
- Inconel UNS N06601 Orifice Flanges Stockist
- ASTM B564 601 Inconel Plate Flanges
Inconel 601 Flanges Export Destinations
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |
Get An Easy Quotation
Manufacturer Of Inconel 601 Flanges.