Athlete Piping Solution is an acknowledged trader and seller of SS 316Ti Instrumentation Ball Valves, which are touted to be because of the low carbon model of the alloy. Stainless Steel UNS S31635 Instrumentation Ball Valves is austenitic steel advanced to be used in excessive temperature corrosion resistant applications. The characteristic of this steel is just like that of different alloys except offering stores contrary every different. They have branches which might be smaller in length to that of the run to gain the preferred waft and stress via the device. The characteristic of this steel is to extrude path of waft in a piping device. They are extraordinarily long lasting and well-recognized for its excessive tensile strength, corrosion resistance & dimensional accuracy.
Stainless Steel WNR 1.4571 Instrumentation Ball Valves are used in lots of varied applications, of which a few are indexed as follows - Cold and Hot water, Chemical plants, Furnace Building, etc. It is so synthetic that each inlet and outlet ends are on a not unusual centre line. The characteristic of this alloy is to lessen the road from a bigger to a smaller pipe length; this glaringly effects in an expanded waft stress. With these products, the smaller outlet quit is off centre to the bigger quit permitting it to line up with one aspect of the inlet and now no longer with the different.
Alloy 316Ti Instrumentation Ball Valves are less complicated and much less luxurious to produce, however does now no longer permit pretty the equal versatility because the eccentric reducer. They are the maximum not unusual kind of fittings due to their ability to warp beneath the movement of bending moments. It is used to extrude the path of run of pipe. The benefits of these products are that it may healthy lengthy distance transition requirements. The primary application of this steel may be determined in heater coils and heat exchangers, boilers etc. They are used for arresting the punch via a hammer to splay the tail, sewing, or plying via unique stud pliers.
Size | 1/8″ To 2″ / 6 Mm To 50 Mm |
Thread | NPT, BSPP, BSPT, JIC, METRIC, UNF |
Connection | Threaded, Tube End, Butt Weld, Socket Weld, Weld Nipple, Flanged, Sae |
Function | 2 Way, 3 Way, 4 Way, 5 Way |
Pressure Rating | 1500 Psi, 3000 Psi, 6000 Psi, 10000 Psi, 15000 Psi, 20000 Psi |
Seal Ring Material | PTFE, PVDF, DELRIN, PEEK, GRAPHITE |
Standard | ISO , DIN , ANSI , API , ASME , AWWA , MSS |
Design Standards | Valve Body – ASME B 16.34 Valve Flanges – ASME 16.5 Face to Face – ASME B 16.10 (long pattern) |
End Connection | Flanged End / Screwed End / Butt Weld End / Screwed to BSPT / NPT / Socket Weld / Buttweld with extended Nipple |
Ball Valve Type | One Piece, Two Piece, Three Piece, 3 Way, 4 Way, High temperature, fire safe, trunnion mounted Full Bore, Metal Seated, separate ball and shaft, split body design, pneumatically operated ball valve with Manual Over ride and gas purging provision. |
Media Temperature | (-120* C To 500*C )Range As Per Pressure |
Equivalent Brands | Swagelok, Parker, Dk-Lok, Hamlet, Oliver Valves, Hoke |
Application | Material Handling Equipment, Earth Moving Machineries , Power Generating Plant , Steel Manufacturing Plant , Mining Industries , Chemical Processing Machines , Piping Line , Paint Industries , Trucks And Trailers , Automation , Agriculture Machines , Aerospace & Defence Equipments |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
Looking to Buy SS 316Ti Ball Valves from Suppliers, Ask For ready stock of UNS S31635 2 Piece Ball Valves in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 316Ti | 0.08 max | 2.0 max | 0.75 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.395 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
END CONNECTION SIZE | ORIFICE | A | |||
---|---|---|---|---|---|
(IN) | (MM) | (IN) | (MM) | (IN) | (MM) |
1/8 | 3.17 | 0.09 | 2.4 | 1.01 | 25.5 |
3/16 | 4.76 | 0.13 | 3.2 | 1.1 | 28 |
1/4 | 6.35 | 0.19 | 4.8 | 1.2 | 30 |
3/8 | 9.52 | 0.28 | 7.1 | 1.45 | 36.5 |
1/2 | 12.7 | 0.41 | 10.3 | 1.74 | 44.2 |
0.12 | 3 | 0.09 | 2.4 | 1.01 | 25.5 |
0.24 | 6 | 0.19 | 4.8 | 1.2 | 30 |
0.31 | 8 | 0.19 | 4.8 | 1.23 | 31.2 |
0.39 | 10 | 0.28 | 7.1 | 1.45 | 36.5 |
0.47 | 12 | 0.41 | 10.3 | 1.74 | 44.2 |
B | C | D | |||
---|---|---|---|---|---|
(IN) | (MM) | (IN) | (MM) | (IN) | (MM) |
1.01 | 25.5 | 1.36 | 34.5 | 0.59 | 15.1 |
1.1 | 28 | 1.36 | 34.5 | 0.59 | 15.1 |
1.2 | 30 | 1.47 | 37.3 | 0.78 | 19.8 |
1.45 | 36.5 | 2.07 | 52.5 | 1.13 | 28.7 |
1.74 | 44.2 | 2.44 | 62 | 1.5 | 38.1 |
1.01 | 25.5 | 1.36 | 34.5 | 0.59 | 15.1 |
1.2 | 30 | 1.47 | 37.3 | 0.59 | 15.1 |
1.23 | 31.2 | 1.47 | 37.3 | 0.78 | 19.8 |
1.45 | 36.5 | 2.07 | 52.5 | 1.13 | 28.7 |
1.74 | 44.2 | 2.44 | 62 | 1.5 | 38.1 |
E | W | F | CV |
|||
---|---|---|---|---|---|---|
(IN) | (MM) | (IN) | (MM) | (IN) | (MM) | |
1/4 | 6.4 | 1.26 | 32 | 0.58 | 14.7 | 0.15 |
1/4 | 6.4 | 1.26 | 32 | 0.58 | 14.7 | 0.35 |
1/4 | 6.4 | 1.26 | 32 | 0.78 | 19.8 | 0.9 |
3/8 | 9.7 | 1.5 | 38.1 | 1.12 | 28.5 | 2 |
3/8 | 9.7 | 2.36 | 60 | 1.5 | 38 | 4.6 |
1/4 | 6.4 | 1.26 | 32 | 0.58 | 14.7 | 0.15 |
1/4 | 6.4 | 1.26 | 32 | 0.78 | 19.8 | 0.9 |
1/4 | 9.7 | 1.5 | 38.1 | 0.78 | 19.8 | 0.9 |
3/8 | 9.7 | 1.7 | 43 | 1.12 | 28.5 | 2 |
3/8 | 9.7 | 2.36 | 60 | 1.5 | 38 | 4.6 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |