Athlete Piping Solution is an acknowledged trader and stockist of SS 317L Instrumentation Ball Valves, which are formed into components and longitudinally seam-welded. Stainless Steel UNS S31703 Instrumentation Ball Valves is a typically disk-formed by means of method of getting a hole (commonly within the middle) this is in widespread used to dole out the stack of a threaded fastener, which includes a nut or screw. Other makes use of this steel are as a spring (belleville washer, wave washer), spacer, put on pad, locking device, preload consultant tool, and to trim down vibration (rubber washer). They normally have an outer diameter (OD) in terms of instances of the width of its internal diameter (ID). Such products are as well identified as press stud, snap, popper and additionally a brace of interconnecting discs.
Stainless Steel WNR 1.4438 Instrumentation Ball Valves are being produced from a metallic or plastic, that's typically utilized in desire to buttons to button up apparel and for parallel capabilities. Meanwhile, it may be joined to leather-based or material by means of spellbinding within the business enterprise of a die and punch set designated to the type of rivet snaps. They are fabricated by means of the use of super standard first-rate of steel which might be in the end excessive in sturdiness and performance. They are being fabricated from seamless pipe and tube, both by means of a cold or hot forming procedure.
Alloy 317L Instrumentation Ball Valves also are formed steadfastly from a thing of a continuing pipe material, by means of simply making an application of heat and stress to adjust the pipe without delay into a few different shapes or at the least in an elbow shape. Also, they're made out of pickled plate or sheet, hot-rolled, and annealed. The characteristic of this steel is to dam off the quilt of a line in piping systems. It is completed by means of putting the pipe quit cap fittings over the open line and welding across the joint. Such products in a piping device permit short disconnection of the unique segment involved.
Size | 1/8″ To 2″ / 6 Mm To 50 Mm |
Thread | NPT, BSPP, BSPT, JIC, METRIC, UNF |
Connection | Threaded, Tube End, Butt Weld, Socket Weld, Weld Nipple, Flanged, Sae |
Function | 2 Way, 3 Way, 4 Way, 5 Way |
Pressure Rating | 1500 Psi, 3000 Psi, 6000 Psi, 10000 Psi, 15000 Psi, 20000 Psi |
Seal Ring Material | PTFE, PVDF, DELRIN, PEEK, GRAPHITE |
Standard | ISO , DIN , ANSI , API , ASME , AWWA , MSS |
Design Standards | Valve Body – ASME B 16.34 Valve Flanges – ASME 16.5 Face to Face – ASME B 16.10 (long pattern) |
End Connection | Flanged End / Screwed End / Butt Weld End / Screwed to BSPT / NPT / Socket Weld / Buttweld with extended Nipple |
Ball Valve Type | One Piece, Two Piece, Three Piece, 3 Way, 4 Way, High temperature, fire safe, trunnion mounted Full Bore, Metal Seated, separate ball and shaft, split body design, pneumatically operated ball valve with Manual Over ride and gas purging provision. |
Media Temperature | (-120* C To 500*C )Range As Per Pressure |
Equivalent Brands | Swagelok, Parker, Dk-Lok, Hamlet, Oliver Valves, Hoke |
Application | Material Handling Equipment, Earth Moving Machineries , Power Generating Plant , Steel Manufacturing Plant , Mining Industries , Chemical Processing Machines , Piping Line , Paint Industries , Trucks And Trailers , Automation , Agriculture Machines , Aerospace & Defence Equipments |
STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
SS 317L | 1.4438 | S31703 | SUS 317L | X2CrNiMo18-15-4 |
Looking to Buy SS 317L Ball Valves from Suppliers, Ask For ready stock of UNS S31703 2 Piece Ball Valves in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 317L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 – 20.00 | 3.00 – 4.00 | 11.00 – 15.00 | 57.89 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
END CONNECTION SIZE | ORIFICE | A | |||
---|---|---|---|---|---|
(IN) | (MM) | (IN) | (MM) | (IN) | (MM) |
1/8 | 3.17 | 0.09 | 2.4 | 1.01 | 25.5 |
3/16 | 4.76 | 0.13 | 3.2 | 1.1 | 28 |
1/4 | 6.35 | 0.19 | 4.8 | 1.2 | 30 |
3/8 | 9.52 | 0.28 | 7.1 | 1.45 | 36.5 |
1/2 | 12.7 | 0.41 | 10.3 | 1.74 | 44.2 |
0.12 | 3 | 0.09 | 2.4 | 1.01 | 25.5 |
0.24 | 6 | 0.19 | 4.8 | 1.2 | 30 |
0.31 | 8 | 0.19 | 4.8 | 1.23 | 31.2 |
0.39 | 10 | 0.28 | 7.1 | 1.45 | 36.5 |
0.47 | 12 | 0.41 | 10.3 | 1.74 | 44.2 |
B | C | D | |||
---|---|---|---|---|---|
(IN) | (MM) | (IN) | (MM) | (IN) | (MM) |
1.01 | 25.5 | 1.36 | 34.5 | 0.59 | 15.1 |
1.1 | 28 | 1.36 | 34.5 | 0.59 | 15.1 |
1.2 | 30 | 1.47 | 37.3 | 0.78 | 19.8 |
1.45 | 36.5 | 2.07 | 52.5 | 1.13 | 28.7 |
1.74 | 44.2 | 2.44 | 62 | 1.5 | 38.1 |
1.01 | 25.5 | 1.36 | 34.5 | 0.59 | 15.1 |
1.2 | 30 | 1.47 | 37.3 | 0.59 | 15.1 |
1.23 | 31.2 | 1.47 | 37.3 | 0.78 | 19.8 |
1.45 | 36.5 | 2.07 | 52.5 | 1.13 | 28.7 |
1.74 | 44.2 | 2.44 | 62 | 1.5 | 38.1 |
E | W | F | CV |
|||
---|---|---|---|---|---|---|
(IN) | (MM) | (IN) | (MM) | (IN) | (MM) | |
1/4 | 6.4 | 1.26 | 32 | 0.58 | 14.7 | 0.15 |
1/4 | 6.4 | 1.26 | 32 | 0.58 | 14.7 | 0.35 |
1/4 | 6.4 | 1.26 | 32 | 0.78 | 19.8 | 0.9 |
3/8 | 9.7 | 1.5 | 38.1 | 1.12 | 28.5 | 2 |
3/8 | 9.7 | 2.36 | 60 | 1.5 | 38 | 4.6 |
1/4 | 6.4 | 1.26 | 32 | 0.58 | 14.7 | 0.15 |
1/4 | 6.4 | 1.26 | 32 | 0.78 | 19.8 | 0.9 |
1/4 | 9.7 | 1.5 | 38.1 | 0.78 | 19.8 | 0.9 |
3/8 | 9.7 | 1.7 | 43 | 1.12 | 28.5 | 2 |
3/8 | 9.7 | 2.36 | 60 | 1.5 | 38 | 4.6 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |