Get a quote

Incoloy 825 Sheest & Plates

Products 825 Incoloy Sheet
Incoloy Alloy 825 Plates
Alloy 825 HR Plates
Equivalent Grades UNS N08825
DIN 2.4858
NCF 825
Forms Sheet
Plates
Hot Rolled Plate
Standard Specifications ASTM B424
ASME SB424
En - NiCr21Mo

825 Incoloy Hot Rolled Plate Stockist, UNS N08825 Plates, 2.4858 Perforated Sheets, Incoloy Alloy 825 Sheets, Incoloy 825 Cold Rolled Plate, Incoloy 825 Finish Sheets Manufacturer in India.

Athlete Piping Solution is a recognized exporter and distributor of Incoloy Alloy 825 Sheets & Plates, which affords the finest stage of resistance to corrosion. Secondary processing in our Incoloy UNS N08825 Sheets & Plates, such as heat treating, may be used to in addition refine the part. They are normally utilized in condensers, coolers and heat exchangers in which resistance to corrosion and erosion are necessary. Forging of this steel additionally affords method for aligning the grain glide to pleasant gain preferred directional strengths. The rate of the precipitation reactions is depending on the chemical composition of this steel and different metallurgical factors. It will face up to a few impartial or decreasing acids at low to slight concentrations and temperatures.


825 Incoloy CR Sheest, 825 Incoloy Strips, Incoloy 825 Perforated Sheets, Alloy 825 Plates, ASTM B424 Incoloy® Alloy 825 Checker Plate, Nickel Alloy 825 Industrial Plate, ANSI B16.9 Incoloy Alloy 825 Chequered Plates Supplier in Mumbai, India.

The presence of corrosive water and excessive temperatures method that such Incoloy WNR 2.4858 Sheets & Plates are the best material for desalination plants, making them less difficult and inexpensive to construct to the size required. Matching filler metals in these products are endorsed on the way to gain a weld metallic with top-rated corrosion resistance and mechanical properties. The beginning pressure of this steel wished for bending is barely better than for standard austenitic stainless steels. We are one of the pioneer supplier & supplier for excessive quality products, which can be available in one-of-a-kind shapes and sizes for our esteemed customers at marketplace main prices.

Nickel Alloy 825 Sheets & Plates is beneficial for storing and coping with acetic acid, specifically in solutions in which it is blended with formic acid. It additionally has enough corrosion resistance in liquid metals, nitric acid, mildly decreasing acids, and moist chlorine or bromine gas (so long as a minimum quantity of oxygen or water is present). Time and temperature mixtures for this steel to the proper of the curve shave much less than of effect toughness. Meanwhile, the curves of this alloy correspond to an ambient temperature and effect toughness. Molybdenum on this steel will increase pitting resistance in halides or different species that can have an effect on the steel’s corrosion potential.

Specification of Incoloy 825 Sheets & Plates

Specifications ASTM B424 / ASME SB424, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled Plate 0.5-6.4 mm
Hot rolled Plate 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
International Standard ASTM A480
ASTM A959
ASME IID
EN ISO 9445
EN ISO 18286
EN 10051
EN 10088-1
ISO 15510
Tolerances (width / thickness) EN 10258/ DIN 59381)
EN 10151
EN 10088
Finish 2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Profiling Plasma Plate Cutting
Laser Plate Cutting
Oxy-propane Flame Cutting

Equivalent Grades Incoloy 825 Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo

Various Types of 825 Incoloy Sheets & Plates

Incoloy 825 Shim Sheets
Incoloy 825 Shim Sheets
Incoloy 825 Perforated Sheet
Incoloy 825 Perforated Sheet
Incoloy 825 Chequered Plates
Incoloy 825 Chequered Plates
Incoloy 825 Strips
Incoloy 825 Strips
Incoloy 825 Foils
Incoloy 825 Foils
Incoloy 825 Coils
Incoloy 825 Coils

Incoloy 825 Sheets & Plates Finishes

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

Looking to Buy Incoloy Alloy 825 Sheets from Suppliers, Ask For ready stock of UNS N08825 Plates Elbow in Mumbai, India.

Incoloy 825 Sheets & Plates Chemical Composition

Grade C Mn Si P S Cr Ni
Incoloy 825 0.05 max 1.0 max 0.5 max - 0.03 max 19.5 – 23.5 38 - 46

Incoloy Alloy 825 Sheets & Plates Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Incoloy 825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80000 , MPa – 550 Psi – 32000 , MPa – 220 30 %

Thickness Chart Incoloy 825 Sheets & Plates

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

Incoloy 825 Sheets & Plates Thickness Chart

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm   lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

Weight Per Incoloy 825 Sheets & Plates

Plate Thickness (mm) Weight (kg/m) kg/meter (width 1200mm) kg/meter (width 1500mm) kg/meter (width 1800mm) kg/meter (width 2400mm)
3 23.55 28.3 35.3 42.4 56.5
4 31.4 37.7 47.1 56.5 75.4
5 39.25 47.1 58.9 70.7 94.2
6 47.1 56.5 70.7 84.8 113
8 62.8 75.4 94.2 113 150.7
10 78.5 94 118 141 188
12 94.2 113 141 170 226
16 125.6 151 188 226 301
20 157 188 236 283 377
22 172.7 207 259 311 415
25 196.25 236 294 353 471
28 219.8 264 330 396 528
32 251.2 301 377 452 603
36 282.6 339 424 509 678
40 314 377 471 565 754
45 353.25 424 530 636 848
50 392.5 471 589 707 942
55 431.75 518 648 777 1036
60 471 565 707 848 1130
65 510 612 765 918 1224
70 549.5 659 824 989 1319
75 588.75 707 883 1060 1413
80 628 754 942 1130 1507
90 706.5 848 1060 1272 1696
100 785 942 1178 1413 1884

Ready Stock of Incoloy 825 Sheets & Plates

  • Alloy 825 Sheets
  • Incoloy 825 Polished Plates
  • 825 Incoloy CR Plates
  • Nickel Alloy 825 Matt PVC Sheets
  • Incoloy® Alloy 825 Polished Plates
  • Incoloy UNS N08825 Plate Mill Finish
  • ASTM B424 825 Incoloy Coils
  • Incoloy WERKSTOFF NR. 2.4858 Sheets
  • 825 Incoloy Sheet
  • Incoloy UNS N08825 Sheets
  • Incoloy 825 Plates
  • Incoloy WERKSTOFF NR. 2.4858 Plates
  • ANSI B16.9 825 Incoloy Chequered Plate
  • Nickel Alloy 825 Cold Rolled Sheets
  • Alloy 825 Laser Cut Plate
  • Incoloy 825 Mill Finish
  • Incoloy® Alloy 825 Mirror Finish Sheet
  • Incoloy 825 HR Sheets
  • Alloy 825 Finish Sheet
  • Incoloy 825 Tread Plate
  • Incoloy Alloy 825 Plates
  • 825 Incoloy Shim Sheets
  • Incoloy UNS N08825 Plate
  • Incoloy® Alloy 825 Plate
  • Incoloy 825 Plasma Cutting Plate
  • Incoloy UNS N08825 Chequered Plates
  • Incoloy® Alloy 825 Sheets
  • Nickel Alloy 825 Rolling Plate
  • Incoloy DIN 1.4307 Shim Sheets
  • Incoloy 825 10mm Plate
  • ASTM B424 Alloy 825 Perforated Sheet
  • Incoloy Alloy 825 Strips
  • 825 Incoloy Perforated Sheets
  • Nickel Alloy 825 Checker Plate
  • Incoloy WNR. 2.4858 Industrial Plate
  • Incoloy® Alloy 825 Hot Rolled Plate

Incoloy 825 Sheets & Plates Export Destinations

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Get An Easy Quotation

Manufacturer Of Incoloy 825 Sheets & Plates.
Call Us Any Time:
+91 8080256582 or
Get in Touch