Incoloy 925 Sheets, Incoloy Alloy 925 Plates, 925 Incoloy Perforated Sheet

Incoloy 925 Finish Sheets, Alloy 925 Perforated Sheets, UNS N09925 Plates, Incoloy 925 Cold Rolled Plate, 925 Incoloy Hot Rolled Plate Stockist, Incoloy Alloy 925 Sheets Manufacturer in India.

Athlete Piping Solution is a recognized exporter and seller of Incoloy Alloy 925 Sheets & Plates, which are available in one-of-a-kind sizes. The excessive chromium content material of this Incoloy UNS N09925 Sheets & Plates produces desirable resistance to nitric acid, and to a number of natural acids and caustic solutions. The unique overall performance of this alloy will rely upon the type and impact of teen extra chemical species. The benefit of this product in a complex, mildly - decreasing acid with many minor chemical species is illustrated with phosphoric acid solutions. Because it's miles notably higher on this situation, it is a great candidate for moist technique phosphoric acid applications. The formation of precipitates can embrittlement this product, decreasing its ambient temperature ductility and toughness, and might lower its corrosion resistance.

Alloy 925 Plates, Incoloy 925 Perforated Sheets, ANSI B16.9 Incoloy Alloy 925 Chequered Plates, 925 Incoloy Strips, ASTM B424 Incoloy® Alloy 925 Checker Plate, Nickel Alloy 925 Industrial Plate, 925 Incoloy CR Sheest Supplier in Mumbai, India.

Alloy 925 Plates is commonly used for applications which contain slight corrosion, excessive strength, and heat resistance. We use a variety of delivery companions to deliver in a single day this steel in the overseas countries, and provide a complete variety of logistics solutions from precedence specific offerings to greater cost - powerful economic system shipments everywhere in the globe. At the generic low electrochemical potentials, atomic hydrogen can be generated on the surfaces of our products with the aid of using the discount of sea water. Embrittlement because of excessive temperature might also additionally possibly arise whilst hydrogen diffuses into this steel, and so hydrogen diffuses plenty quicker within the ferrite segment than within the austenite segment.

An excessive mechanical pressure will increase the threat of excessive temperature in our Nickel Alloy 925 Sheets & Plates with the aid of using growing the hydrogen diffusion rate, crack initiation and propagation within the material. In this steel, cracks generally tend to propagate within the embrittled ferrite segment and arrest at ferrite austenite segment boundaries. Susceptibility to excessive temperature in our products notably will increase with growing austenite spacing, in which coarse - grained microstructures are consequently greater susceptible. They are beneficial whilst aeration isn't always present (oxygen facilitates protect steel beneath such situations).

Specification of Incoloy 925 Sheets & Plates

Specifications	ASTM B424 / ASME SB424, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard	MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range	Cold rolled Plate 0.5-6.4 mm Hot rolled Plate 3.0–10.0 mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness	0.3 mm to 120 mm
International Standard	ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510
Tolerances (width / thickness)	EN 10258/ DIN 59381) EN 10151 EN 10088
Finish	2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness	Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service	Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of	SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Profiling	Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting

Equivalent Grades Incoloy 925 Sheets & Plates

STANDARD	WERKSTOFF NR.	UNS
Incoloy 925	–	N09925

Various Types of 925 Incoloy Sheets & Plates

Incoloy 925 Shim Sheets

Incoloy 925 Perforated Sheet

Incoloy 925 Chequered Plates

Incoloy 925 Strips

Incoloy 925 Foils

Incoloy 925 Coils

Incoloy 925 Sheets & Plates Finishes

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe

Looking to Buy Incoloy Alloy 925 Sheets from Suppliers, Ask For ready stock of UNS N09925 Plates Elbow in Mumbai, India.

Incoloy 925 Sheets & Plates Chemical Composition

Grade	Ni	Cr	Fe	Si	Mo	Cu	Mn	C	S	Al
Incoloy 925	42 – 46	19.55 – 22.5	22 min	0.5 max	2.5 – 3.5	1.5 – 3.0	1.0 max	0.03 max	0.03 max	0.1 – 0.5

Incoloy Alloy 925 Sheets & Plates Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.14 g/cm3	1343°C	650	300	30 %

Thickness Chart Incoloy 925 Sheets & Plates

Thickness	Thickness	Size Range	Surface Area per Unit weight		Approx Weight per Sheet
inches	mm		lbs/ft²	kg/m²	lbs	kg
0.015	0.381	36 x 96	0.630	3.07566	15.12	6.84936
0.015	0.381	36 x 120	0.630	3.07566	18.90	8.5617
0.0178	0.45212	36 x 96	0.756	3.690792	18.15	8.22195
0.0178	0.45212	36 x 120	0.756	3.690792	22.68	10.27404
0.0178	0.45212	48 x 96	0.756	3.690792	24.19	10.95807
0.0178	0.45212	48 x 120	0.756	3.690792	30.24	13.69872
0.0235	0.5969	30 x 96	1.008	4.921056	20.16	9.13248
0.0235	0.5969	30 x 120	1.008	4.921056	25.20	11.4156
0.0235	0.5969	36 x 96	1.008	4.921056	24.19	10.95807
0.0235	0.5969	36 x 120	1.008	4.921056	30.24	13.69872
0.0235	0.5969	36 x 144	1.008	4.921056	36.29	16.43937
0.0235	0.5969	48 x 96	1.008	4.921056	32.26	14.61378
0.0235	0.5969	48 x 120	1.008	4.921056	40.32	18.26496
0.0235	0.5969	48 x 144	1.008	4.921056	48.39	21.92067
0.0291	0.73914	30 x 96	1.260	6.15132	25.20	11.4156
0.0291	0.73914	30 x 120	1.260	6.15132	31.50	14.2695
0.0291	0.73914	36 x 96	1.260	6.15132	30.24	13.69872
0.0291	0.73914	36 x 120	1.260	6.15132	37.80	17.1234
0.0291	0.73914	36 x 144	1.260	6.15132	45.37	20.55261
0.0291	0.73914	48 x 96	1.260	6.15132	40.32	18.26496
0.0291	0.73914	48 x 120	1.260	6.15132	50.41	22.83573
0.0291	0.73914	48 x 144	1.260	6.15132	60.49	27.40197
0.0355	0.9017	30 x 96	1.512	7.381584	30.24	13.69872
0.0355	0.9017	30 x 120	1.512	7.381584	37.80	17.1234
0.0355	0.9017	36 x 96	1.512	7.381584	36.29	16.43937

Incoloy 925 Sheets & Plates Thickness Chart

Thickness	Thickness	Size Range	Surface Area per Unit weight		Approx Weight per Sheet
inches	mm		lbs/ft²	kg/m²	lbs	kg
0.015	0.381	36 x 96	0.630	3.07566	15.12	6.84936
0.015	0.381	36 x 120	0.630	3.07566	18.90	8.5617
0.0178	0.45212	36 x 96	0.756	3.690792	18.15	8.22195
0.0178	0.45212	36 x 120	0.756	3.690792	22.68	10.27404
0.0178	0.45212	48 x 96	0.756	3.690792	24.19	10.95807
0.0178	0.45212	48 x 120	0.756	3.690792	30.24	13.69872
0.0235	0.5969	30 x 96	1.008	4.921056	20.16	9.13248
0.0235	0.5969	30 x 120	1.008	4.921056	25.20	11.4156
0.0235	0.5969	36 x 96	1.008	4.921056	24.19	10.95807
0.0235	0.5969	36 x 120	1.008	4.921056	30.24	13.69872
0.0235	0.5969	36 x 144	1.008	4.921056	36.29	16.43937
0.0235	0.5969	48 x 96	1.008	4.921056	32.26	14.61378
0.0235	0.5969	48 x 120	1.008	4.921056	40.32	18.26496
0.0235	0.5969	48 x 144	1.008	4.921056	48.39	21.92067
0.0291	0.73914	30 x 96	1.260	6.15132	25.20	11.4156
0.0291	0.73914	30 x 120	1.260	6.15132	31.50	14.2695
0.0291	0.73914	36 x 96	1.260	6.15132	30.24	13.69872
0.0291	0.73914	36 x 120	1.260	6.15132	37.80	17.1234
0.0291	0.73914	36 x 144	1.260	6.15132	45.37	20.55261
0.0291	0.73914	48 x 96	1.260	6.15132	40.32	18.26496
0.0291	0.73914	48 x 120	1.260	6.15132	50.41	22.83573
0.0291	0.73914	48 x 144	1.260	6.15132	60.49	27.40197
0.0355	0.9017	30 x 96	1.512	7.381584	30.24	13.69872
0.0355	0.9017	30 x 120	1.512	7.381584	37.80	17.1234
0.0355	0.9017	36 x 96	1.512	7.381584	36.29	16.43937

Weight Per Incoloy 925 Sheets & Plates

Plate Thickness (mm)	Weight (kg/m)	kg/meter (width 1200mm)	kg/meter (width 1500mm)	kg/meter (width 1800mm)	kg/meter (width 2400mm)
3	23.55	28.3	35.3	42.4	56.5
4	31.4	37.7	47.1	56.5	75.4
5	39.25	47.1	58.9	70.7	94.2
6	47.1	56.5	70.7	84.8	113
8	62.8	75.4	94.2	113	150.7
10	78.5	94	118	141	188
12	94.2	113	141	170	226
16	125.6	151	188	226	301
20	157	188	236	283	377
22	172.7	207	259	311	415
25	196.25	236	294	353	471
28	219.8	264	330	396	528
32	251.2	301	377	452	603
36	282.6	339	424	509	678
40	314	377	471	565	754
45	353.25	424	530	636	848
50	392.5	471	589	707	942
55	431.75	518	648	777	1036
60	471	565	707	848	1130
65	510	612	765	918	1224
70	549.5	659	824	989	1319
75	588.75	707	883	1060	1413
80	628	754	942	1130	1507
90	706.5	848	1060	1272	1696
100	785	942	1178	1413	1884

Ready Stock of Incoloy 925 Sheets & Plates

Alloy 925 Plates
ASTM B424 925 Incoloy Coils
Alloy 925 Sheets
Incoloy UNS N09925 Sheets
Incoloy 925 HR Sheets
Incoloy® Alloy 925 Mirror Finish Sheet
Nickel Alloy 925 Matt PVC Sheets
Nickel Alloy 925 Cold Rolled Sheets
Incoloy UNS N09925 Plate Mill Finish
Incoloy 925 Plates
925 Incoloy Sheet
Alloy 925 Laser Cut Plate
Incoloy® Alloy 925 Polished Plates
Incoloy 925 Mill Finish
925 Incoloy CR Plates
Incoloy 925 Sheets
ANSI B16.9 925 Incoloy Chequered Plate
Incoloy 925 Polished Plates

Incoloy 925 Tread Plate
ASTM B424 Alloy 925 Perforated Sheet
Alloy 925 Industrial Plate
Incoloy Alloy 925 Strips
925 Incoloy Perforated Sheets
Incoloy 925 Plasma Cutting Plate
Incoloy® Alloy 925 Sheets
Incoloy UNS N09925 Plate
Incoloy® Alloy 925 Hot Rolled Plate
Incoloy 925 Shim Sheets
Incoloy® Alloy 925 Plate
Nickel Alloy 925 Rolling Plate
Incoloy 925 10mm Plate
925 Incoloy Shim Sheets
Incoloy UNS N09925 Chequered Plates
Incoloy Alloy 925 Plates
Alloy 925 Finish Sheet
Nickel Alloy 925 Checker Plate

Incoloy 925 Sheets & Plates Export Destinations

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Incoloy 925 Sheest & Plates